No aplica | (3) |
Biofoam, Insulation; Polyurethane; Spray foam; Soybean oil; Wood fiber | (2) |
Energy; Hardwood products; Energy efficiency; Energy consumption | (2) |
Levulinic acid; Mechanism; Transition state | (2) |
UF resins; UMF resins; Wood composite boards; Formaldehyde emission | (2) |
Más... |
1.
|
REINFORCING POTENTIAL OF JUTE PULP WITH TREMA ORIENTALIS (NALITA) PULP Jahan, M. Sarwar - Rawshan, Sabina
|
2.
|
OPTIMIZATION OF MANNANASE PRODUCTION FROM STREPTOMYCES SP. PG-08-03 IN SUBMERGED FERMENTATION Bhoria, Preeti - Singh, Gursharan - Hoondal, Gurinder Singh
|
3.
|
EXPERIMENTAL STUDY OF STRESS RELAXATION IN THE PROCESS OF COLD MOLDING WITH STRAW Hu, Jian-jun - Lei, Ting-Zhou - Xu, Guang-Yin - Shen, Sheng-Qiang - Liu, Jun-Wei
|
4.
|
ACCESSIBILITY AND CRYSTALLINITY OF CELLULOSE Ioelovich, Michael
|
5.
|
SHOULD WE BE REFINING FIRST, THEN DISCARDING FINES, THEN BLEACHING? Treimanis, Arnis
|
6.
|
PROPERTIES OF GAS AND CHAR FROM MICROWAVE PYROLYSIS OF PINE SAWDUST Wang, Xian-Hua - Chen, Han-Ping - Ding, Xue-Jun - Yang, Hai-Ping - Zhang, Shi-Hong - Shen, Ying-Qiang
|
7.
|
EFFECT OF VARIOUS FIRE RETARDANTS ON BRINELL HARDNESS OF SOME WOOD Kurt, Seref - Özçifçi, Ayhan
|
8.
|
EVALUATION OF OLD CORRUGATED CONTAINER AND WOOD FIBER APPLICATION ON SURFACE ROUGHNESS OF THREE- LAYER PARTICLEBOARD Abdolzadeh, Hamideh - Doosthoseini, Kazem
|
9.
|
STUDY ON THE STRUCTURAL CHANGE OF LIGNIN DURING AUTO-CATALYZED ETHANOL-WATER PULPING OF ASPEN BY 1H-NMR Zhou, Jing-Hui - Sui, Xinjin - Shi, Haiqiang
|
10.
|
SYNTHESIS AND CHARACTERIZATION OF GRAFT COPOLYMERS OF 2-HYDROXYETHYL METHACRYLATE AND SOME COMONOMERS ONTO EXTRACTED CELLULOSE FOR USE IN SEPARATION TECHNOLOGIES Sharma, Rajeev Kumar - Chauhan, Ghanshyam S.
|
11.
|
SPECTROSCOPY AND CHEMICAL STUDIES OF CATION EXCHANGERS PREPARED FROM CORN COBS Nada, Abd Allah Mohamed - Mahdy, Ahmed Ahmed - El-Gendy, Ahmed Ali
|
12.
|
NEAR INFRARED SPECTROSCOPY TO EVALUATE COMPOSITION OF AGRO-BASED PARTICLEBOARDS Campos, Ana Carolina M. - Hein, Paulo Ricardo Gherardi - Mendes, Rafael F. - Mendes, Lourival M. - Chaix, Gilles
|
13.
|
BIOMASS SUPPLY FOR BIOFUEL PRODUCTION: ESTIMATES FOR THE UNITED STATES AND CANADA Kumarappan, Subbu - Joshi, Satish - MacLean, Heather
|
14.
|
DEVELOPMENT OF CELLULOSIC PAPER-BASED TEST STRIPS FOR Cr(VI) DETERMINATION Kong, Fangong - Ni, Yonghao
|
15.
|
PERMEATION OF POLYELECTROLYTES AND OTHER SOLUTES INTO THE PORE SPACES OF WATER-SWOLLEN CELLULOSE: A REVIEW Wu, Ning - Hubbe, Martin A. - Rojas, Orlando J. - Park, Sunkyu
|
16.
|
ENHANCEMENT IN IN VITRO DIGESTIBILITY OF WHEAT STRAW OBTAINED FROM DIFFERENT GEOGRAPHICAL REGIONS DURING SOLID STATE FERMENTATION BY WHITE ROT FUNGI Arora, Daljit Singh - Sharma, Rakesh Kumar
|
17.
|
OPTIMIZATION OF XYLANASE PRODUCTION FROM FREE AND IMMOBILIZED CELLS OF FUSARIUM SOLANI F7 Gupta, Vijai Kumar - Gaur, Rajeeva - Yadava, Santosh Kumar - Darmwal, Nandan Singh
|
18.
|
Study on the Pulp and Fiber Characteristics of Wheat Straw and Eucalyptus Pulps GUO, Sanchuan - ZHAN, Huaiyu - zhang, chengfeng - FU, Shiyu - HEIJNESSON-HULTÉN, ANETTE - BASTA, JIRI - GRESCHIK, THOMAS
|
19.
|
EFFECTS OF HEAT TREATMENT ON CALABRIAN PINE (PINUS BRUTIA TEN.) WOOD Ates, Saim - Akyildiz, Mehmet Hakan - Ozdemir, Hasan
|
20.
|
STUDY OF THE STRUCTURE OF WOOD-RELATED BIOPOLYMERS BY SORPTION METHODS Chirkova, Jelena - Andersons, Bruno - Andersone, Ingeborga
|
21.
|
ADSORPTION OF CELLOBIOSE-PENDANT POLYMERS TO A CELLULOSE MATRIX DETERMINED BY QUARTZ CRYSTAL MICROBALANCE ANALYSIS Yokota, Shingo - Ohta, Takefumi - Kitaoka, Takuya - Wariishi, Hiroyuki
|
22.
|
ENHANCED PRODUCTION OF CELLULASE-FREE XYLANASE BY ALKALOPHILIC BACILLUS SUBTILIS ASH AND ITS APPLICATION IN BIOBLEACHING OF KRAFT PULP Sanghi, Ashwani - Garg, Neelam - Kuhar, Kalika - Kuhad, Ramesh C. - Gupta, Vijay Kumar
|
23.
|
AN OXIDANT TO REPLACE NITROBENZENE IN LIGNIN ANALYSIS Masingale, Michael P. - Alves, Ericka F. - Bose, Samar K. - Francis, Ray C.
|
24.
|
PREPARATION OF XYLOSE AND KRAFT PULP FROM POPLAR BASED ON FORMIC/ACETIC ACID /WATER SYSTEM HYDROLYSIS Zhuang, Junping - Lin, Lu - Liu, Jing - Luo, Xiaolin - Pang, Chunsheng - Ouyang, Pingkai
|
25.
|
A PRELIMINARY INVESTIGATION INTO THE USE OF ACID-TOLERANT PRECIPITATED CALCIUM CARBONATE FILLERS IN PAPERMAKING OF DEINKED PULP DERIVED FROM RECYCLED NEWSPAPER Shen, Jing - Song, Zhanqian - Qian, Xueren - Liu, Wenxia
|
26.
|
MODIFICATION OF PAPERMAKING GRADE FILLERS: A BRIEF REVIEW Shen, Jing - Song, Zhanqian - Qian, Xueren - Liu, Wenxia
|
27.
|
IMAGING WOOD PLASTIC COMPOSITES (WPCs): X-RAY COMPUTED TOMOGRAPHY, A FEW OTHER PROMISING TECHNIQUES, AND WHY WE SHOULD PAY ATTENTION Muszynski, Lech
|
28.
|
Delignification of Phragmites karka – a Wetland Grass – by Soda Pulping Process Kumar, Lalit; Indian Institute of Technology Roorkee, Saharanpur Campus, Department of Paper Technology - Dutt, Dharm; Indian Institute of Technology Roorkee, Saharanpur Campus, Department of Paper Technology - Bharti, Amit; Indian Institute of Technology Roorkee, Saharanpur Campus, Department of Paper Technology
|
29.
|
Impact of Pulp Consistency on Refining Process Conducted under Constant Intensity Determined by SEL and SEC Factors Olejnik, Konrad; Institute of Papermaking and Printing, Lodz University of Technology
|
30.
|
Modified Cocoa Pod Husk-Filled Polypropylene Composites by Using Methacrylic Acid Koay, Seong Chun; Division of Polymer Engineering, School of Materials Engineering, Universiti Malaysia Perlis, 02600, Jejawi, Perlis, Malaysia - Husseinsyah, Salmah; Division of Polymer Engineering, School of Materials Engineering, Universiti Malaysia Perlis, 02600, Jejawi, Perlis, Malaysia - Osman, Hakimah; Division of Polymer Engineering, School of Materials Engineering, Universiti Malaysia Perlis, 02600, Jejawi, Perlis, Malaysia
|
31.
|
Covalent Immobilization of Lipase onto Citric Acid-Esterified Loofah Sponge Zhu, Jun; College of Life Science, Anhui Normal University, Wuhu - Zhang, Jian; College of Life Science, Anhui Normal University, Wuhu - Lai, Qiumei; College of Life Science, Anhui Normal University, Wuhu - Jiang, Bo; State Key Laboratory of Food Science and Technology, Jiangnan University - Gong, Renmin; College of Life Science, Anhui Normal University, Wuhu
|
32.
|
Performance of Copper-Ethanolamine-impregnated Scots Pine Wood during Exposure to Terrestrial Microorganisms Thaler, Nejc; University of Ljubljana, Biotechnical Faculty - Lesar, Boštjan; Montazna gradnja Tadej Zimic s.p - Humar, Miha; University of Ljubljana, Biotechnical Faculty
|
33.
|
Removal of Cu(II) from Ethanol Fuel Using Mandarin Peel as Biosorbent Ribeiro, Gabriela Costa; University of Uberlandia - Coelho, Luciana Melo; University of Goiás - Oliveira, Eliezer; University of Uberlandia - Coelho, Nívia M. M.; University of Uberlandia
|
34.
|
Effect of Environmental Conditions on the Mechanical Properties and Fungal Degradation of Polycaprolactone/ Microcrystalline Cellulose/Wood Flour Composites Sabo, Ronald; USDA Forest Service Forest Products Laboratory - Jin, Liwei; Institute of Chemical Industry of Forest Products, Chinese Academy of Forestry - Stark, Nicole; USDA Forest Service Forest Products Laboratory - Ibach, Rebecca E.; USDA Forest Service Forest Products Laboratory
|
35.
|
Mechanical Properties Evaluation of Coir Toughened Unsaturated Polyester with Different Reinforced Body Forms Yao, Jia; College of Mechanical Engineering, Jiamusi University, 154007, Jiamusi, China - Lu, Wei; College of Mechanical Engineering, Jiamusi University, 154007, Jiamusi, China - Rong, Shoufan; College of Material Engineering, Jiamusi University, 154007, Jiamusi, China - Hu, Yingcheng; Key Laboratory of Bio-based Material Science and Technology of Ministry of Education of China, College of Material Science and Engineering, Northeast Forestry University, Harbin,150040, China
|
36.
|
Changes in Temperature and Moisture Content in Beech Wood Plasticized by Microwave Heating Gašparík, Miroslav; Czech University of Life Sciences Prague Faculty of Forestry and Wood Sciences - Gaff, Milan; Technical University in Zvolen Faculty of Wood Sciences and Technology and Czech University of Life Sciences Prague Faculty of Forestry and Wood Sciences
|
37.
|
Bio-oil and Biochar as Additional Revenue Streams in South American Kraft Pulp Mills Hamaguchi, Marcelo; Lappeenranta University of Technology - Saari, Jussi; Lappeenranta University of Technology - Vakkilainen, Esa; Lappeenranta University of Technology
|
38.
|
Neutral Sulfite Treatment of Lignocellulosic Pulps Warsta, Elina; Aalto University, Department of Forest Products Technology - Vuorinen, Tapani; Aalto University, Department of Forest Products Technology
|
39.
|
Developing Environmentally Friendly Wood Composite Panels by Nanotechnology Candan, Zeki; Istanbul University - Akbulut, Turgay; Istanbul University
|
40.
|
Biomass Gasification in an Air-Blown Down-Draft Gasifier: Determination of Tar Compounds from Producer Gas Romar, Henrik; Kokkola University Consortium Chydenius - Pekka, Tynjälä; Kokkola University Consortium Chydenius Oulu University - Lassi, Ulla; Kokkola University Consortium Chydenius Oulu University
|
41.
|
Modeling of the Mechanical Properties of a Wood-Fiber/Bicomponent-Fiber Composite van Dyk, Herman; Department of Forest Biomaterials, North Carolina State University - Peralta, Perry; Department of Forest Biomaterials, North Carolina State University - Peszlen, Ilona; Department of Forest Biomaterials, North Carolina State University
|
42.
|
A Novel Method for the Determination of Hydrogen Peroxide in Bleaching Effluents by Spectroscopy Zhang, Qian; South China University of Technology - Fu, Shiyu; South China University of Technology - Li, Hailong; South China University of Technology - Liu, Yu; Shandong Polytechnic University
|
43.
|
Direct Synthesis of Gold Nanocatalysts on TEMPO-oxidized Pulp Paper Containing Aldehyde Groups Azetsu, Akihiro; Kyushu University - Koga, Hirotaka; Osaka University - Yuan, Lu-Yang; Kyushu University - Kitaoka, Takuya; Kyushu University
|
44.
|
The Development of Stresses during the Shaping of the Surface of Aspen Wood and Their Impact on the Quality of the Surface Gaff, Milan; Technical University in Zvolen, Faculty of Wood Science and Technology and Czech University of Life Sciences Prague, Faculty of Forestry and Wood Sciences - Gašparík, Miroslav; Czech University of Life Sciences Prague Faculty of Forestry and Wood Sciences
|
45.
|
Optimization of Multi-enzyme Production by Fungi Isolated from Palm Kernel Expeller using Response Surface Methodology Chen, Wei Li; Institute Tropical Agriculture, University Putra Malaysia - Liang, Juan Boo; Institute Tropical Agriculture, University Putra Malaysia - Jahromi, Mohammed Fasaleh; Institute Tropical Agriculture, University Putra Malaysia - Ho, Yin Wan; Institute bioscience, University Putra Malaysia - Abdullah, Norhani; Institute Tropical Agriculture, University Putra Malaysia
|
46.
|
Effect of Specimen Configuration and Lamination Construction on the Measurement of the In-plane Shear Modulus of Plywood Obtained by the Asymmetric Four-point Bending Test Yoshihara, Hiroshi; Shimane University - Kondo, Hiroki; Faculty of Science and Engineering, Shimane University, Nishikawazu-cho 1060, Matsue, Shimane 690-8504, Japan
|
47.
|
Analysis of Interactions between Colloidal Wood Pitch and Various Mineral Particles by Flow Cytometry Strand, Anders; Åbo Akademi University - Lindqvist, Hanna; Åbo Akademi University - Vähäsalo, Lari; Åbo Akademi University - Blomquist, Markus; FP-Pigments Oy - Sundberg, Anna; Åbo Akademi University
|
48.
|
Fast Acidogenic Fermentation of Corn Stover Through a Two-Step Method: Nitric Acid Hydrolysis Combined with the Fermentation of Hydrolysate Zhang, Rui; School of Energy and Safety Engineering, Tianjin Institute of Urban Construction, Tianjin 300384, China - Liu, Fengguo; School of Energy and Safety Engineering, Tianjin Institute of Urban Construction, Tianjin 300384, China - Liu, Hanqiao; School of Energy and Safety Engineering, Tianjin Institute of Urban Construction, Tianjin 300384, China
|
49.
|
Comparative Study on the Effect of Bentonite or Feldspar Filled Low-Density Polyethylene/Thermoplastic Sago Starch/Kenaf Core Fiber Composites Sarifuddin, Norshahida; Universiti Sains Malaysia (USM) - Ismail, Hanafi; Universiti Sains Malaysia (USM); Clusters for Polymer Composites (CPC), Science and Engineering Research Centre (SERC), USM Engineering Campus, 14300 Nibong Tebal, Penang, Malaysia
|
50.
|
Valorization of Wood Resources for the Cutting of Decorative Veneer in the Context of Sustainable Development of Romanian Forests Dumitrascu, Adela-Eliza; Transilvania University of Brasov - Ciobanu, Valentina D.; Transilvania University of Brasov - Lepadatescu, Badea; Transilvania University of Brasov
|