Título: Design, Manufacturing and characterization of integrated inductors with magnetic layers for DC-DC converter
Autores: Siblini, Ali; Université de Saint Etienne
Fecha: 2012-10-08
Publicador: Advanced Electromagnetics
Fuente:
Tipo: info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
Peer-reviewed Article
Tema: Electromagnetics; Material Science; power electronics
inductor; photolithography; YIG, thin films, magnetic layer; RF sputtering; simulation
Descripción: This paper presents the conception, fabrication and characterization of integrated inductors containing magnetic layers. We require different steps of micro-technologies: preparation of glass and ferrite substrates, RF sputtering, photolithography, etching and finally electroplating techniques for copper and gold films. The geometrical magnitudes are determined by using HFSS simulator software. The measurements performed at low and high frequencies (up to 1 GHz) permit to verify the correlation between experiment and simulation results. The inductance of the manufactured spiral inductor is ​​about 200 nH and it is constant from low frequency up to 0.9 GHz.
Idioma: Inglés

Artículos similares:

On the Evaluation of the Shielding Effectiveness of Electrically Large Enclosure por Gifuni, Angelo; University of Parthenope,Sorrentino, Antonio; University of Parthenope,Fanti, Alessandro; University of cagliari,Ferrara, Giuseppe,Migliaccio, Maurizio; University of Parthenope,Mazzarella, Giuseppe; University of Cagliari,Corona, Federico; University of Parthenope
Frequency Dependent Model of Leakage Inductance for Magnetic Components por Wilson, Peter R; School of Electronics and Computer Science University of Southampton Southampton SO17 1BJ United Kingdom
Electromagnetic Absorbers based on High-Impedance Surfaces: From ultra-narrowband to ultra-wideband absorption por Costa, Filippo; University of Pisa, Department of Information Engineering, Via G. Caruso 16, 56122 Pisa, Italy,Monorchio, Agostino; University of Pisa, Department of Information Engineering, Via G. Caruso 16, 56122 Pisa, Italy
Scattering forces on magneto-dielectric particles and the electromagnetic momentum density por Marques, Manuel I.; Universidad Autonoma de Madrid,Saenz, Juan J.; Universidad Autonoma de Madrid
Novel antenna concepts via coordinate transformation por Tichit, Paul-Henri; Univ. Paris-Sud, CNRS,Burokur, Shah Nawaz; Univ. Paris-Sud, CNRS,Wu, Xinying; Univ. Paris-Sud, CNRS,Germain, Dylan; Univ. Paris-Sud, CNRS,de Lustrac, A.; IEF, Paris-Sud University
Curvilinear vector finite difference approach to the computation of waveguide modes por Fanti, Alessandro; University of cagliari,Mazzarella, Giuseppe; University of cagliari,Montisci, Giorgio; University of cagliari
Difficulties in teaching electromagnetism: an eight year experience at Pierre and Marie Curie University por Roussel, Hélène; UPMC, Univ. Paris 6,Hélier, Marc; UPMC, Univ. Paris 6
Roughness effect on the efficiency of dimer antenna based biosensor por Barchiesi, Dominique; University of technology of Troyes,Kessentini, Sameh; University of technology of Troyes
Magnetic Shape Memory Alloys as smart materials for micro-positioning devices por Hubert, Arnaud; Institut Femto-ST, département AS2M 24 rue A. Savary 25000 Besancon,Calchand, Nandish; Institut Femto-ST, département AS2M 24 rue A. Savary 25000 Besancon,Le Gorrec, Yann; Institut Femto-ST, département AS2M 24 rue A. Savary 25000 Besancon,Gauthier, Jean-Yves; Laboratoire Ampère UMR 5005, Université de Lyon/CNRS INSA LYON, bat. Saint-Exupery, Avenue Jean Capelle 69621 Villeurbanne Cedex
10 
Polarizability Matrix Extraction of a Bianisotropic Metamaterial from the Scattering Parameters of Normally Incident Plane Waves por Karamanos, Theodosios D.; Aristotle University of Thessaloniki,Dimitriadis, Alexandros I.; Aristotle University of Thessaloniki,Nikolaos V., Kantartzis; Aristotle University of Thessaloniki