|
1.
|
Sliding Mode Controller based of Building Control Rebuck, Darren - Rolls, Tameka
|
|
2.
|
A Fixed Point Theorem In 2-Banach Space For Non-Expansive Mapping Gupta, Vishal - Tripathi, A.K.
|
|
3.
|
Recent Advances and Future Prospects in Single-Electronics Noor, Masud Al
|
|
4.
|
MAC Protocol for Hardware Design of Vehicle System based on FPGA Waechter, Darryl
|
|
5.
|
A USB based Ultrasonic Data Acquisition and Analysis System Milliron, Cody - Norgard, Nelson
|
|
6.
|
Understanding the Dynamic Characteristics of a Regulated Loading System Kellems, Hillary - Aultman, Selena
|
|
7.
|
Predicting Grid Resource using SVM and Simulated Annealing Algorithms Han, Yun - Liu, Yi
|
|
8.
|
Saving the energy: apply the Pattern Recognition algorithms in Aluminum Industrial Production Huang, Hua - Tian, Yuan
|
|
9.
|
Evaluating Soil Water Content based on ANN and Time Domain Reflectometry Higuchi, Hugh - Mcfee, Fernando
|
|
10.
|
An Intelligent Test System based on Control Theory and Pattern Recognition Seckman, Edwina
|
|
11.
|
Optimizing the Reflectarray Antennas's Bandwidth and Loss Performance Vaughns, Neil
|
|
12.
|
Radio Wave Attenuation Character in Mine Tunnel: a field study Howser, Lonnie
|
|
13.
|
An Approach for Actuator Frequency Characteristic Test System Error Measurement He, Ye - Li, Shuo
|
|
14.
|
Optimal Cost Control and Monitoring of a System of Uncertainty Hane, Tia - Grunwald, Saundra
|
|
15.
|
Characterization study on the variation of weight percentage of Alumina Aluminum in-situ Particulate reinforced composite material Raghuram, K.S. - Raju, N.V.S.
|
|
16.
|
Implementation of Fuzzy Logic in TCR-FC Jain, Vipin - Kumar, Narendra
|
|
17.
|
Photoelastic Analysis of Bending Strength of Helical Gear Kailash C., Bhosale - Dongare, A.D.
|
|
18.
|
Towards Modeling Equal Humanity with Philanthropy and IT Constraints using Mathematical Utilities Haider, Waqas - Afzal, Syeda Safia
|
|
19.
|
Designing, fabrication and performance analysis of solar still for purification of water Jadhav, S.L.
|
|
20.
|
Secured Overlapping Technique for Digital Watermarking Sharif, Muhammad
|
|
21.
|
A new Approach to Compute Convex Hull Sharif, Muhammad
|
|
22.
|
Niosome: A Novel Drug Delivery System Mujoriya, Rajesh - Singh, Diwakar - Bodla, Ramesh Babu - Dhamande, Kishor
|
|
23.
|
Dynamic Response and Flutter Prediction of Structures with Unknown System Parameters using Experimental Modal Parameters Pankaj, Achuthan. C. - G., Shanthini. - M.V, Shivaprasad. - N, Chandra. - M, Manjuprasad.
|
|
24.
|
Optimized SVPWM for Multilevel Inverter Urmila, Bandaru - Subbarayudu, D.
|
|
25.
|
Determination of resonant frequency of a piezoelectric ring for generation of ultrasonic waves Evan, Murimi - John, Kihiu - George, Nyakoe - Stephen, Mutuli - James, Kimotho
|
|
26.
|
Sinusoidal Reference Technique for Power Factor Correction of a SEPIC Converter Fed from AC Supply Ezzat, M.
|
|
27.
|
Analysis of bending strength of helical gear by FEM Bhosale, Kailash C.
|
|
28.
|
An investigation on image denoising technique using pixel-component-analysis Kathiravan, S. - Raja, N. Guhan - Kumar, R. Arun
|
|
29.
|
Acceleration-Displacement Ratio Transform of Differentials for Transverse Plates and Constant Stiffness Buckling Solution Johnarry, Tonye Ngoji
|
|
30.
|
Magnetohydrodynamic Peristaltic motion with heat and mass transfer of a Jeffery fluid in a tube through porous medium El-dabe, Nabil.T.M. - Sallam, Sallam.N. - Mona.A.A, Mohamed - Abo Zaid, Mohamed Y. - Abd-Elmonem, Assmaa
|
|
31.
|
Calculation of Power Loss and Voltage Regulation for Different Static Loads Kumar, Sambugari Anil - Nabi., Mullan Abdul
|
|
32.
|
Refactoring for Multi-Dimensional Reusability Ahmad, Bashir - Ahmad, Shakeel - Saqib, Sheikh Muhammad - Asghar, Muhammad Zubair - Jan, Muhammad Ahmad
|
|
33.
|
Nonlinear Thermal Analysis of Functionally Graded Plates Using Higher Order Theory Jyothula, Suresh Kumar. - Bathini, Sidda Reddy. - Reddy. C, Eswara - Kontakkagari, Vijaya Kumar Reddy.
|
|
34.
|
Solar photo catalytic degradation of environmental contaminants B. L., Chavan
|
|
35.
|
A Single-Phase Doubly-Excited DC-AC Buck-Boost Converter Suitable for Feeding AC Loads from PV Systems Ezzat, M.
|
|
36.
|
Improvement of Dynamic Performance of AGC of Hydrothermal System Employing Capacitive Energy Storage and TCPS Rao, C.Srinivasa
|
|
37.
|
Design of Multilevel Inverter Driven Induction Machine Bandaru, Urmila - Subbarayudu, Subbarayudu
|
|
38.
|
Performance Analysis of a Multi-Source, Single-Output, Buck-Boost DC-AC Converter Feeding Active Power to a 3-Phase Distribution Grid Ezzat, M.
|
|
39.
|
P-q Theory Based Shunt Active Power Conditioner for Mitigation of Power Quality Problems Merazy, Mostafa A. - Ahmed, Adel A. - Abdel-Bar, Fared N.
|
|
40.
|
The Tent Chaotic Mapping: Analysis for Generation of Binary Codes for Better Performance by Using MATLAB NagaVamsi, Annepu .Venkata - Mohan, G.S.S.S.S.V.K. - Patnaik, Pradeep Kumar
|
|
41.
|
A QoS-Aware Routing Protocol for Real-time Applications in Wireless Sensor Networks Cherian, Mary - Nair, T.R Gopalakrishnan
|
|
42.
|
An Intelligent System for Static and Real-time Well Drilling Data Analysis Hagwood, Tanisha - Wang, Ye
|
|
43.
|
A Deep-sea Soft Sediments Shearing Strength-Shearing Displacement Model Asencio, Ted - Molander, Christian
|
|
44.
|
Fast Multi-objective Approach for Energy Saving in Two-tiered Wireless Multimedia Sensor Networks Fagundes, Javier - Chen, Yihua
|
|
45.
|
A Car Plate Recognition Platform based on TI DSP Muhammad, Ahmed
|
|
46.
|
Energy efficient Hydroxy Gas generator Bhattacharya, Ritesh - Srivastava, Shakun
|
|
47.
|
Space Vector Based Hybrid Random PWM Algorithm for DTC-IM Drive To Achieve Superior Waveform Quality Reddy, P. Nagasekhara - Amarnath, J. - Reddy, P. Linga
|
|
48.
|
Desirable Traits Influencing Grain Yield in Soybean (Glycine max (L.) Merrill) Bekele, Agdew - Alemahu, Getnet
|
|
49.
|
A Review on study of Buccal Drug Delivery System MUJORIYA, RAJESH - DHAMANDE, KISHOR - WANKHEDE, UTPAL RAJ - ANGURE, SHRIPAL
|
|
50.
|
Theoretical Analysis on Modulation Bandwidth for Distributed Reflector Laser with Quantum Wire Structures Mobarak, Mahjabin
|
|
51.
|
Optimal Design of Multi-Machine Power System Stabilizer Using Genetic Algorithm Naresh, G.
|
|
52.
|
Random Zero Vector Distribution PWM Algorithm for Direct Torque Control of Induction Motor Drive for Noise Reduction Reddy, P. Nagasekhara - Amarnath, J. - Reddy, P. Linga
|
|
53.
|
Partial Pair Programming: Link between Solo and Pair Programming Ahmad, Bashir - Saqib, Sheikh Muhammad - Ahmad, Shakeel - Asghar, Muhammad Zubair
|
|
54.
|
Study of Free Vibrations Of Visco-Elastic Square Plate Of Variable Thickness With Thermal Effect Khanna, Anupam - Sharma, Ashish Kumar - Bhaita, Meenu
|
|
55.
|
INS/GPS Based State Estimation of Micro Air Vehicles Parametric Study Using Extended Kalman Filter (EKF) Schemes Riaz, Sadia
|
|
56.
|
Vibration of Non-Homogeneous Visco-Elastic Square Plate of Variable Thickness In both directions With Thermal Effect Khanna, Anupam - Sharma, Ashish Kumar
|
|
57.
|
Transient analysis of grid-connected wind-driven PMSG, DFIG and SCIG at fixed and variable speeds Abdel-Salam, Mazen - Ahmed, Adel - Mahrous, Mahmoud
|
|
58.
|
Modeling of Machining Parameters in CNC End Milling Using Principal Component Analysis Based Neural Networks Nagallapati, Jaya Krishna. - Bathini, Sidda Reddy. - Kontakkagari, Vijaya Kumar Reddy.
|
|
59.
|
Biomechanical Analysis of Flex Elbow on Bowling Speed in Cricket Hussain, Ikram - Bari, Mohd. Arshad - Imran, Mohd.
|
|
60.
|
Analysis of Arm Movement in Badminton of ForehandLong and Short Service Hussain, Ikram - Ahmed, Saleem - Bari, Mohd.Arshad - Ahmad, Ahsan - Mohammad, Arif - Khan, Asim
|
|
61.
|
Extension of Tinny Application for Cloud Based Custom Software with Encryption Queue: A Strategy to Protect Data on Cloud Jan, Muhammad Ahmad - Saqib, Sheikh Muhammad - Ahmad, Bashir - Ahmad, Shakeel
|
|
62.
|
Analysis of properties of Al-Cu composition using P/M route Kasiram, Raji - Raj, Alfred Cecil
|
|
63.
|
Development of Models for the Prediction of Mechanical Properties of Rolled Ribbed Medium Carbon Steel Akinlabi, OYETUNJI . - Olawale, ADEBAYO Abdullah
|
|
64.
|
Modelling and Formulation of Holonic Workforce Allocation to Reduce the Impact of Absenteeism and Turnover Lim, Yongching - Chin, Jengfeng
|
|
65.
|
Enhancement Security in Smart TV Web Application Iyer, Manimozhi - Sanmugam, Senthilmurugan - Mungara, Jitendranath - Janakiraman, Janakiraman
|
|
66.
|
Use Of Jute Geo Textile For Strengthening Of Sub Grade Of Road Work Jadhav, Surendra. P. - Damgir, R. M.
|
|
67.
|
Design of an Adaptive Controller for Cylindrical Plunge Grinding Process Kabini, Samuel Karanja - Ikua, Bernard Wamuti - Nyakoe, George Nyauma
|
|
68.
|
Dynamic Modeling of Chatter Vibration in Cylindrical Plunge Grinding Process Kabini, Samuel Karanja - Ikua, Bernard Wamuti - Nyakoe, George Nyauma
|
|
69.
|
Study of Free Vibration of Visco-Elastic Square Plate of Variable Thickness with Thermal Effect Khanna, Anupam - Sharma, Ashish Kumar - Bhaita, Meenu
|
|
70.
|
Simulation of Relay modes in IEEE 802.16j Mobile Multi-hop Relay (MMR) WIMAX Networks Kumar, Satish - Nagarajan, N. - Nagarajan, N.
|
|
71.
|
Effects of Polyester Geo Textiles On CBR Of Road Sub Base Patil, Anirudha
|
|
72.
|
Optimal placement of a piezoelectric ring in an ultrasonic powder transport system Murimi, Evan - John, Kihiu - George, Nyakoe - Stephen, Mutuli - James, Kimotho
|
|
73.
|
Development and strengthening of aluminium alloy (Al-Cu) by mechanical working and heat treatment Kasiram, Raji - Raj, Alfred Cecil
|
|
74.
|
Optimal Design of Multi-Machine Power System Stabilizer Using Genetic Algorithm Naresh, G. - M.Ramalinga Raju, K.Ravindra - Narasimham, S.V.L.
|
|
75.
|
Comparative Analysis of MIT Rule and Lyapunov Rule in Model Reference Adaptive Control Scheme Pankaj, Swarnkar - Kumar, Jain Shailendra - R.K., Nema
|
|
76.
|
Diagnosis of Broken Rotor Bar Fault of Induction Motor through Envelope Analysis of Motor Startup Current using Hilbert and Wavelet Transform Ahamed, Syed Kamruddin - Karmakar, Subrata - Sarkar, Arghya - Mitra, Madhuchhanda - Sengupta, Samarjit
|
|
77.
|
Optimal Capacitor Placement in Radial Distribution Systems using Artificial Bee Colony (ABC) Algorithm Sarma, Avadhanam Kartikeya - Rafi, Kakarla Mahammad
|
|
78.
|
Idle / Waiting Time Operator Oi,w Of An Equivalent Job For A Job Block Criteria To Minimize The Rental Cost In Two Stage Flow Shop Scheduling, the Processing Time Associated With Probabilities Gupta, Deepak - Sharma, Sameer - Gulati, Naveen - Singh, Harminder
|
|
79.
|
Genetic Diversity of Finger Millet [Eleusine coracana (L.) Gaertn] Landraces Characterized by Random Amplified Polymorphic DNA Analysis Bezaweletaw, kebere
|
|
80.
|
Laboratory Validation of Calculations of Magnetic Field Mitigation Underneath Transmission Lines Using Passive and Active Shield Wires Radwan, Roshdy - Abdel-Salam, Mazen - Mahdy, Abdel-Bary - Samy, Mohamed
|
|
81.
|
Robust super-resolution for petite image sequences Kathiravan, S - Kanakaraj, J.
|
|
82.
|
Direct Torque Control Algorithm for Induction Motor Drives for the Mitigation of Common Mode Voltage Lakshmi, V. Anantha - Reddy, V.C.Veera - Kalavathi, M.Surya
|
|
83.
|
Performance of SF6 GIB under the influence of power frequency voltages Goud, L.Rajasekhar - Kumar, M.Uday - Subbarayudu, D. - Amarnath, J.
|
|
84.
|
Effects of Methods and Rates of Phosphorus Fertilizer Application and Planting Methods on Yield and Related Traits of Maize (Zea mays L.) on Soil of Hawassa Area Mazengia, Waga
|
|
85.
|
A Deadline Aware Real-time Routing Protocol for Wireless Sensor Networks Mary, Cherian - Nair Gopalakrishnan, T.R.
|
|
86.
|
Modelling of a Sequential Low-level Language Program Using Petri Nets Adesina, Ganiyu Rafiu - Olatunde, Olabiyisi Stephen - Olusayo, Omidiora Elijah - Tayo, Arulogun Oladiran - Olusola, Okediran Oladotun
|
|
87.
|
A Heuristic Based Multi-Objective Approach for Network Reconfiguration of Distribution Systems Kumar, V. Raj - Viswanath, B. - Kumar, D. Vijaya
|
|
88.
|
NCTUns Simulation model for IEEE 802.16j Mobile multi hop Relay (MMR) WIMAX networks Kumar, D.Satish - Nagarajan, Dr.N.
|
|
89.
|
Experimental Investigation of Catalytic Surface Reaction for Different Metal Surfaces PONNUSAMY, P. - RAJENDIRAN, G. - SUBRAMANIAN, R. - NEDUNCHEZHIAN, N.
|
|
90.
|
INS/GPS Based State Estimation of Micro Air Vehicles Using Inertial Sensors Riaz, Sadia - Asghar, Atif Bin
|
|
91.
|
Elemental, structural and optical properties of Cd1-xCoxS thin films prepared by spray pyrolysis technique Kamruzzaman, M. - Luna, T. R. - Podder, J.
|
|
92.
|
Numerical Prediction of Laminar Characteristics of Fluid Flow and Heat Transfer in Finned-Tube Heat Exchangers Bhuiyan, Arafat A. - Islam, A K M Sadrul - Amin, M. Ruhul
|
|
93.
|
Three-Phase Isolated Boost DC-DC Converter for High Voltage Applications Babu, R.Samuel Rajesh - Henry, Joseph
|
|
94.
|
Adoption of B2B e-commerce by the SMEs in Bangladesh Noor, Masud Al - Arif, Rubaiyat Bin
|
|
95.
|
Design and Simulation of a Novel Clustering based Fuzzy Controller for DC Motor Speed Control Meena, Tushir - Smriti, Srivastava
|
|
96.
|
Influence of fluidity and Hausner’s ratio in the process behaviour of P/M of Al -% wt Cu Composite Kasiram, Raji - Raj, Alfred Cecil
|
|
97.
|
Kinematical Analysis of Forehand and Backhand Smash in Badminton Hussain, Ikram - Bari, Mohd.Arshad
|
|
98.
|
Wavelet based QRS detection in ECG using MATLAB Narayana, K.V.L. - Rao, A.Bhujanga
|
|
99.
|
Modified Approach for Cutting Force Measurement Face in Milling Antony Sequeira, Anil - Bhat, Dr. Thirumaleswara - Sriram, N.S.
|
|
100.
|
Scope of Energy Consumption & Energy Conservation in Indian auto part manufacturing Industry Naik, Irawati - More, S.S. - Naik, Himanshu
|
