Lignocellulose-based self-assembled micelles have emerged as a new generation of value-added functional nanostructures that show promise to address issues concerning the depletion of non-renewable resources; also these materials may contribute to the growing enthusiasm of utilizing biomass resources. Lignocellulose micelles…

In this study the thermal conductivity of different wood materials was determined. For this purpose, Scots pine (Pinus sylvestris L.), Uludag fir (Abies Bornmülleriana Matff), Oriental beech (Fagus orientalis L), Oak (Quercus robur L.), and Chestnut of Anatolia (Castanea sativa…

The particleboards with different density from specially prepared particles from black locust and willow were prepared. The standard mechanical parameters of the panels were investigated, as well as the corner wall connections with eccentric connecting fitting element or confirmat strength.…

In this research, the cell morphology and physico-mechanical properties of HDPE/EVA/Rice hull hybrid foamed composites were investigated. For this aim, composites were prepared via melt mixing and then foamed using a compression molding method. Mechanical properties such as tensile strength,…

Dynamic mechanical and thermal analysis of oil palm empty fruit bunches (EFB)/jute fiber reinforced epoxy hybrid composites were carried out. The effect of layering pattern on dynamic mechanical properties (storage modulus (E’), loss modulus (E”), and tan δ) was investigated…

The hydrolysis and condensation (aging) dynamics of aqueous solutions of (3-glycidyloxypropyl)trimethoxysilane (GPS), vinyltrimethoxysilane (VTS), and (3-aminopropyl)trimethoxysilane (APS) and their penetrability into the cell walls of European spruce (Picea abies) wood were studied to investigate the feasibility of using silanes as…

Papermaking pulps are a mixture of fibres, fibre fragments, and small cells (parenchyma or ray cells), usually called pulp fines. The interactions between pulp fines and a cationic copolymer of acrylamide and acryloxyethyltrimethyl ammonium chloride were investigated based on solid-liquid…

Copper sulfide-containing lignocellulose nanocomposites with improved electroconductivity were obtained. Two methods for preparing the copper sulfide lignocellulose nanocomposites were developed. An optimization of the parameters for obtaining of the nanocomposites with respect to obtaining improved electroconductivity, economy, and lower quantities…

Kinetic modeling of lignin removal under conditions of high-boiling solvent (HBS, i.e. 1,4-butanediol) auto-catalyzed pulping of bagasse has been studied. The experimental data were collected based on the absorption of dissolved lignin in black liquor at a wavelength of 320…

It has been generally accepted that some ionic liquids are good media for homogeneous functionalization of cellulose. However, phthalylated cellulosic derivatives prepared in ionic liquids without any catalyst have lower DS as compared to the acetylated ones. In order to…