|
1.
|
Characterization study on the variation of weight percentage of Alumina Aluminum in-situ Particulate reinforced composite material Raghuram, K.S. - Raju, N.V.S.
|
|
2.
|
Energy efficient Hydroxy Gas generator Bhattacharya, Ritesh - Srivastava, Shakun
|
|
3.
|
Modified Approach for Cutting Force Measurement Face in Milling Antony Sequeira, Anil - Bhat, Dr. Thirumaleswara - Sriram, N.S.
|
|
4.
|
Scope of Energy Consumption & Energy Conservation in Indian auto part manufacturing Industry Naik, Irawati - More, S.S. - Naik, Himanshu
|
|
5.
|
Effect of retempering with retarding admixture on properties of concrete subjected to prolonged mixing Mane, Kiran M. - Kulkarni, D. K.
|
|
6.
|
Micro Smart Grid Technology for Rural Indian model Naik, Himanshu - Chauhan, D.S.
|
|
7.
|
High-Speed 64-Bit CMOS Binary Comparator Satyajit Anand, Anjuli,
|
|
8.
|
Effectiveness of a Proposed System Design on Academic Management of Kampala International University: Design, Development and Implementation Mubaraka, Conrad M. - Senyonga, Taddeo - R. Sumil, Novembrieta
|
|
9.
|
The Use of Gum Arabic Liquid and Modified Liquid in Concrete Mixes Abdeljaleel, N.S. - Hassaballa, A. E. - Mohamed, A.Rahman E.
|
|
10.
|
Optimization of Pressure Drop in a Spouted Bed via Genetic Algorithm Alwan, Ghanim
|
|
11.
|
Design and development of Fixture for Friction Stir Welding BAGHEL, PUSHP KUMAR
|
|
12.
|
Technology Innovations in the Smelting of Chromite Ore Ugwuegbu, Chima
|
|
13.
|
ANALYSING THE IMPACT OF AUTOMOBILE SPARE PARTS SELLERS IN GHANA. ( A CASE STUDY AT SIWIDO KOKOMPE AT CAPE COAST). MOTEY, FESTUS
|
|
14.
|
Integrating ICT in Library Management: Design and Development of an Automated Library Management System for Cavendish University Uganda Jibia, Mamman Salisu - Mubaraka, Conrad M. - Michael, Odie
|
|
15.
|
Study of Creep-Fatigue Interaction in the Prosthetic Socket below Knee Ismail, Mustafa Tariq - Jweeg, Muhsin Jabir - Resan, Kadhim Kamil
|
|
16.
|
Mechanical Properties of Block Masonry Units Manufactured From Different Kinds of Recycled Materials Naghoj, Nart
|
|
17.
|
Effect of Hexagonal Boron Nitride on Energy Band Gap of Graphene Antidot Structures Palla, Penchalaiah - Raina, J.P.
|
|
18.
|
Integrating ICT in Traffic Police Department in Uganda: Design and Development of Traffic Case Management System (TCRIS) Mubaraka, Conrad M. - Jirgi, Ibrahim Mohammed - Nanyanzi, Percy L. B.
|
|
19.
|
Selection of Thermal Insulation Thickness of Cold Store Enclosures Al-Radaedeh, Jehad - Al-Zgoul, Bassam - Frehat, Muhamad
|
|
20.
|
A Study on Piezoelectric Elements and Its Utility in Designing of Electronic Scale Manna, Nilotpal
|
|
21.
|
Modeling the Grade Point Average (GPA) System in Nigerian Universities H. K., Oduwole, - S. L., Shehu, - G. K., Adegoke, - J. A., Osondu
|
|
22.
|
Stochastic Analysis and Performance Evaluation of a Complex Thermal Power Plant K, Suleiman - Ali, U.A. - Yusuf, Ibrahim
|
|
23.
|
Model for Measuring Post-Harvest Technological Capability of Paddy Farmers in Dealing with Climate Change Hayun A, Anggara - ., Machfud - ., Sutrisno - Suryani, Ani
|
|
24.
|
MPPT Based on Power Mapping and Frequency Derivative El-Saady, Gaber - A. Ibrahim, El-Nobi - Gelany, Mahmoud
|
|
25.
|
Sediment Deposition in Nigeria Reservoirs: Impacts and Control Measures Ezugwu, C. N.
|
|
26.
|
Design, Construction and Characterization of a Sliding- Plate- Evaporator Freezer (Spef) M. C., Nwosu - S. C., Umeh - C. O., Okeke - L. O., Afugbuom
|
|
27.
|
An investigation of shell-helical coiled tube heat exchanger used for solar water heating system Amori, Karima E. - Sherza, Jinan Shaker
|
|
28.
|
Sliding Mode Controller based of Building Control Rebuck, Darren - Rolls, Tameka
|
|
29.
|
A Fixed Point Theorem In 2-Banach Space For Non-Expansive Mapping Gupta, Vishal - Tripathi, A.K.
|
|
30.
|
Recent Advances and Future Prospects in Single-Electronics Noor, Masud Al
|
|
31.
|
MAC Protocol for Hardware Design of Vehicle System based on FPGA Waechter, Darryl
|
|
32.
|
A USB based Ultrasonic Data Acquisition and Analysis System Milliron, Cody - Norgard, Nelson
|
|
33.
|
Understanding the Dynamic Characteristics of a Regulated Loading System Kellems, Hillary - Aultman, Selena
|
|
34.
|
Predicting Grid Resource using SVM and Simulated Annealing Algorithms Han, Yun - Liu, Yi
|
|
35.
|
Saving the energy: apply the Pattern Recognition algorithms in Aluminum Industrial Production Huang, Hua - Tian, Yuan
|
|
36.
|
Evaluating Soil Water Content based on ANN and Time Domain Reflectometry Higuchi, Hugh - Mcfee, Fernando
|
|
37.
|
An Intelligent Test System based on Control Theory and Pattern Recognition Seckman, Edwina
|
|
38.
|
Optimizing the Reflectarray Antennas's Bandwidth and Loss Performance Vaughns, Neil
|
|
39.
|
Radio Wave Attenuation Character in Mine Tunnel: a field study Howser, Lonnie
|
|
40.
|
An Approach for Actuator Frequency Characteristic Test System Error Measurement He, Ye - Li, Shuo
|
|
41.
|
Optimal Cost Control and Monitoring of a System of Uncertainty Hane, Tia - Grunwald, Saundra
|
|
42.
|
Implementation of Fuzzy Logic in TCR-FC Jain, Vipin - Kumar, Narendra
|
|
43.
|
Photoelastic Analysis of Bending Strength of Helical Gear Kailash C., Bhosale - Dongare, A.D.
|
|
44.
|
Towards Modeling Equal Humanity with Philanthropy and IT Constraints using Mathematical Utilities Haider, Waqas - Afzal, Syeda Safia
|
|
45.
|
Designing, fabrication and performance analysis of solar still for purification of water Jadhav, S.L.
|
|
46.
|
Secured Overlapping Technique for Digital Watermarking Sharif, Muhammad
|
|
47.
|
A new Approach to Compute Convex Hull Sharif, Muhammad
|
|
48.
|
Niosome: A Novel Drug Delivery System Mujoriya, Rajesh - Singh, Diwakar - Bodla, Ramesh Babu - Dhamande, Kishor
|
|
49.
|
Dynamic Response and Flutter Prediction of Structures with Unknown System Parameters using Experimental Modal Parameters Pankaj, Achuthan. C. - G., Shanthini. - M.V, Shivaprasad. - N, Chandra. - M, Manjuprasad.
|
|
50.
|
Optimized SVPWM for Multilevel Inverter Urmila, Bandaru - Subbarayudu, D.
|
|
51.
|
Determination of resonant frequency of a piezoelectric ring for generation of ultrasonic waves Evan, Murimi - John, Kihiu - George, Nyakoe - Stephen, Mutuli - James, Kimotho
|
|
52.
|
Sinusoidal Reference Technique for Power Factor Correction of a SEPIC Converter Fed from AC Supply Ezzat, M.
|
|
53.
|
Analysis of bending strength of helical gear by FEM Bhosale, Kailash C.
|
|
54.
|
An investigation on image denoising technique using pixel-component-analysis Kathiravan, S. - Raja, N. Guhan - Kumar, R. Arun
|
|
55.
|
Acceleration-Displacement Ratio Transform of Differentials for Transverse Plates and Constant Stiffness Buckling Solution Johnarry, Tonye Ngoji
|
|
56.
|
Magnetohydrodynamic Peristaltic motion with heat and mass transfer of a Jeffery fluid in a tube through porous medium El-dabe, Nabil.T.M. - Sallam, Sallam.N. - Mona.A.A, Mohamed - Abo Zaid, Mohamed Y. - Abd-Elmonem, Assmaa
|
|
57.
|
Calculation of Power Loss and Voltage Regulation for Different Static Loads Kumar, Sambugari Anil - Nabi., Mullan Abdul
|
|
58.
|
Refactoring for Multi-Dimensional Reusability Ahmad, Bashir - Ahmad, Shakeel - Saqib, Sheikh Muhammad - Asghar, Muhammad Zubair - Jan, Muhammad Ahmad
|
|
59.
|
Nonlinear Thermal Analysis of Functionally Graded Plates Using Higher Order Theory Jyothula, Suresh Kumar. - Bathini, Sidda Reddy. - Reddy. C, Eswara - Kontakkagari, Vijaya Kumar Reddy.
|
|
60.
|
Solar photo catalytic degradation of environmental contaminants B. L., Chavan
|
|
61.
|
A Single-Phase Doubly-Excited DC-AC Buck-Boost Converter Suitable for Feeding AC Loads from PV Systems Ezzat, M.
|
|
62.
|
Improvement of Dynamic Performance of AGC of Hydrothermal System Employing Capacitive Energy Storage and TCPS Rao, C.Srinivasa
|
|
63.
|
Design of Multilevel Inverter Driven Induction Machine Bandaru, Urmila - Subbarayudu, Subbarayudu
|
|
64.
|
Performance Analysis of a Multi-Source, Single-Output, Buck-Boost DC-AC Converter Feeding Active Power to a 3-Phase Distribution Grid Ezzat, M.
|
|
65.
|
P-q Theory Based Shunt Active Power Conditioner for Mitigation of Power Quality Problems Merazy, Mostafa A. - Ahmed, Adel A. - Abdel-Bar, Fared N.
|
|
66.
|
The Tent Chaotic Mapping: Analysis for Generation of Binary Codes for Better Performance by Using MATLAB NagaVamsi, Annepu .Venkata - Mohan, G.S.S.S.S.V.K. - Patnaik, Pradeep Kumar
|
|
67.
|
A QoS-Aware Routing Protocol for Real-time Applications in Wireless Sensor Networks Cherian, Mary - Nair, T.R Gopalakrishnan
|
|
68.
|
An Intelligent System for Static and Real-time Well Drilling Data Analysis Hagwood, Tanisha - Wang, Ye
|
|
69.
|
A Deep-sea Soft Sediments Shearing Strength-Shearing Displacement Model Asencio, Ted - Molander, Christian
|
|
70.
|
Fast Multi-objective Approach for Energy Saving in Two-tiered Wireless Multimedia Sensor Networks Fagundes, Javier - Chen, Yihua
|
|
71.
|
A Car Plate Recognition Platform based on TI DSP Muhammad, Ahmed
|
|
72.
|
Space Vector Based Hybrid Random PWM Algorithm for DTC-IM Drive To Achieve Superior Waveform Quality Reddy, P. Nagasekhara - Amarnath, J. - Reddy, P. Linga
|
|
73.
|
Desirable Traits Influencing Grain Yield in Soybean (Glycine max (L.) Merrill) Bekele, Agdew - Alemahu, Getnet
|
|
74.
|
A Review on study of Buccal Drug Delivery System MUJORIYA, RAJESH - DHAMANDE, KISHOR - WANKHEDE, UTPAL RAJ - ANGURE, SHRIPAL
|
|
75.
|
Theoretical Analysis on Modulation Bandwidth for Distributed Reflector Laser with Quantum Wire Structures Mobarak, Mahjabin
|
|
76.
|
Optimal Design of Multi-Machine Power System Stabilizer Using Genetic Algorithm Naresh, G.
|
|
77.
|
Random Zero Vector Distribution PWM Algorithm for Direct Torque Control of Induction Motor Drive for Noise Reduction Reddy, P. Nagasekhara - Amarnath, J. - Reddy, P. Linga
|
|
78.
|
Partial Pair Programming: Link between Solo and Pair Programming Ahmad, Bashir - Saqib, Sheikh Muhammad - Ahmad, Shakeel - Asghar, Muhammad Zubair
|
|
79.
|
Study of Free Vibrations Of Visco-Elastic Square Plate Of Variable Thickness With Thermal Effect Khanna, Anupam - Sharma, Ashish Kumar - Bhaita, Meenu
|
|
80.
|
INS/GPS Based State Estimation of Micro Air Vehicles Parametric Study Using Extended Kalman Filter (EKF) Schemes Riaz, Sadia
|
|
81.
|
Vibration of Non-Homogeneous Visco-Elastic Square Plate of Variable Thickness In both directions With Thermal Effect Khanna, Anupam - Sharma, Ashish Kumar
|
|
82.
|
Transient analysis of grid-connected wind-driven PMSG, DFIG and SCIG at fixed and variable speeds Abdel-Salam, Mazen - Ahmed, Adel - Mahrous, Mahmoud
|
|
83.
|
Modeling of Machining Parameters in CNC End Milling Using Principal Component Analysis Based Neural Networks Nagallapati, Jaya Krishna. - Bathini, Sidda Reddy. - Kontakkagari, Vijaya Kumar Reddy.
|
|
84.
|
Biomechanical Analysis of Flex Elbow on Bowling Speed in Cricket Hussain, Ikram - Bari, Mohd. Arshad - Imran, Mohd.
|
|
85.
|
Analysis of Arm Movement in Badminton of ForehandLong and Short Service Hussain, Ikram - Ahmed, Saleem - Bari, Mohd.Arshad - Ahmad, Ahsan - Mohammad, Arif - Khan, Asim
|
|
86.
|
Extension of Tinny Application for Cloud Based Custom Software with Encryption Queue: A Strategy to Protect Data on Cloud Jan, Muhammad Ahmad - Saqib, Sheikh Muhammad - Ahmad, Bashir - Ahmad, Shakeel
|
|
87.
|
Analysis of properties of Al-Cu composition using P/M route Kasiram, Raji - Raj, Alfred Cecil
|
|
88.
|
Development of Models for the Prediction of Mechanical Properties of Rolled Ribbed Medium Carbon Steel Akinlabi, OYETUNJI . - Olawale, ADEBAYO Abdullah
|
|
89.
|
Modelling and Formulation of Holonic Workforce Allocation to Reduce the Impact of Absenteeism and Turnover Lim, Yongching - Chin, Jengfeng
|
|
90.
|
Enhancement Security in Smart TV Web Application Iyer, Manimozhi - Sanmugam, Senthilmurugan - Mungara, Jitendranath - Janakiraman, Janakiraman
|
|
91.
|
Use Of Jute Geo Textile For Strengthening Of Sub Grade Of Road Work Jadhav, Surendra. P. - Damgir, R. M.
|
|
92.
|
Design of an Adaptive Controller for Cylindrical Plunge Grinding Process Kabini, Samuel Karanja - Ikua, Bernard Wamuti - Nyakoe, George Nyauma
|
|
93.
|
Dynamic Modeling of Chatter Vibration in Cylindrical Plunge Grinding Process Kabini, Samuel Karanja - Ikua, Bernard Wamuti - Nyakoe, George Nyauma
|
|
94.
|
Study of Free Vibration of Visco-Elastic Square Plate of Variable Thickness with Thermal Effect Khanna, Anupam - Sharma, Ashish Kumar - Bhaita, Meenu
|
|
95.
|
Simulation of Relay modes in IEEE 802.16j Mobile Multi-hop Relay (MMR) WIMAX Networks Kumar, Satish - Nagarajan, N. - Nagarajan, N.
|
|
96.
|
Effects of Polyester Geo Textiles On CBR Of Road Sub Base Patil, Anirudha
|
|
97.
|
Optimal placement of a piezoelectric ring in an ultrasonic powder transport system Murimi, Evan - John, Kihiu - George, Nyakoe - Stephen, Mutuli - James, Kimotho
|
|
98.
|
Development and strengthening of aluminium alloy (Al-Cu) by mechanical working and heat treatment Kasiram, Raji - Raj, Alfred Cecil
|
|
99.
|
Optimal Design of Multi-Machine Power System Stabilizer Using Genetic Algorithm Naresh, G. - M.Ramalinga Raju, K.Ravindra - Narasimham, S.V.L.
|
|
100.
|
Comparative Analysis of MIT Rule and Lyapunov Rule in Model Reference Adaptive Control Scheme Pankaj, Swarnkar - Kumar, Jain Shailendra - R.K., Nema
|
