Secondary organic aerosols (SOA) constitute a significant fraction of the atmospheric particulate matter. Theses particles are formed as a consequence of the oxidation reaction of certain organic gases that leads to the formation of low-volatility compounds. As for other pollutants,…

Studying the boundary layer is imperative because severe weather in this portion of the atmosphere impacts on environment and various facets of national activities and affects the socioeconomic scenario of a region. Near surface boundary layer characteristics are investigated through…

Data mining is one of the most important analysis techniques to automatically extract knowledge from large amount of data. Nowadays, data mining is based on low-level specifications of the employed techniques typically bounded to a specific analysis platform. Therefore, data…

Product-line architectures, i.e. a software architecture and component set shared by a family of products, represents a promising approach to achieving reuse of software. Several companies are initiating or have recently adopted a product-line architecture. However, little experience is available…

Treating industrial wastewater represents a serious problem nowadays; it requires a strong understanding of the particular systems and (in most of cases) ad hoc solutions. This work describes the use of Fenton’s reagent (reaction between H2O2 and Fe(II)) for removing…

Este número, el segundo del volumen 33, incluye doce artículos que, como en el número anterior, corresponden a áreas diferentes de la ingeniería. El medio ambiente, los materiales, sismicidad y la ingeniería de software son algunos de los temas que…

This paper presents analytical data from tests on bricks made from different clay/ash mixtures. The ashes used were obtained from a Hoffmann-type brick-making furnace equipped for coal and municipal solid waste co-firing. The bricks were physically and chemically characterised and…

Experimental results are reported for measuring the thermal diffusivity of two polymer species: low density polyethylene (LDPE) and polypropylene (PP). Measurements were taken in unsteady state heat flow conditions around the materials' melting temperature, using a device specially constructed for…

AlN films were deposited by pulsed laser deposition (PLD) using an Nd: YAG laser (λ = 1064 nm). The films were deposited in a nitrogen atmosphere as working gas; the cathode was an aluminium high purity (99.99%) target. The films…

This study investigated the mechanical properties and performance of μ-AlTiN coating deposited by PVD cathodic arc technique for a specific Al0, 67Ti0, 33N composition deposited on a WC-Co and AISI D2 steel substrate. The structure of the coating was analysed…