The current state of biorefinery development is focused almost entirely on the production of fuel ethanol. However, an ethanol-centric approach misses the crucial example set by the petrochemical industry. The ability to fractionate a raw material, rather than simply pretreating…

Kerala in south India grows several cash crops such as banana and pineapple, the crop residues of which are sources of natural fibres that can be used in hand papermaking. Kerala, however, does not have a tradition in hand papermaking.…

This paper reports results concerning characterization and improvement of biological quality of beechwood prehydrolysate in order to adapt the Candida Scottii yeast to this nutritive medium. Some difficult aspects caused by the presence of lignin compounds in the prehydrolysate are…

This paper examines and discusses the specific belt sanding resistance K (N·cm-2) and specific belt sanding intensity SI (g·cm-2·min-1), for wood of Pinus sylvestris L., Picea abies L., Quercus robra L., Acer pseudoplatanus L., Alnus glutinosa Gaertn., and Populus Nigra…

The aim of this study was to evaluate effects of chemical pretreatment and storage on non-wood pulping and on pulp quality. The processes studied were hot water treatment followed by alkaline peroxide bleaching or soda cooking. The results showed that…

A centrifugal method has been modified and applied to the assessment of water retention value (WRV) in cellulosic materials. Microcrystalline cellulose (MCC), small particles/fibrils isolated from MCC using high-pressure homogenizer, and pulp fibers saturated in water were centrifuged at different…

The papermaking industry can benefit a lot from nanotechnology. This versatile technology can also be used in the area of fillers for papermaking wet end applications. In such applications the main technological examples currently available include wet end addition of…

The aim of this research is to examine the market potential for wood plastic composite (WPC) products in the highway construction sector in place of non-renewable materials (e.g. virgin plastic and steel) and preservative-based products (treated wood). State-level transportation officials…

Effects of ultrasonic pretreatment on the bleaching of chemimechanical pulp (CMP) fiber of triploid Chinese white Poplar were investigated. Before single-stage hydrogen peroxide bleaching, CMP was sonicated at 1.5% pulp consistency and 50oC for 20min with 90% amplitude and 20s…

The paracrystallinity of cellulose samples was studied with a complex of investigation methods including X-ray, NMR, sorption, calorimetry, and some others. It was found that the paracrystalline fraction of cellulose is located on the surface of crystallites as thin monomolecular…