Silver halide sensitized gelatin (SHSG) is one of the most promising techniques for the fabrication of transmission holographic optical elements, achieving relatively high sensitivity of photographic material with the low scattering and high light stability of dichromated gelatin. In this…

We propose a two step method which enables us to obtain transmission Holographic Optical Elements of high diffraction efficiency as well as a good signal-to-noise relation. By means of a device using partially coherent light, a master Holographic Optical Element…

Equations are derived for determining third-order wavefront aberrations in the plane of the exit pupil from the known aberration in the plane of a holographic lens. Using the transformation equations of wavefront aberration when the plane of the exit pupil…

Based on the results of the coupled-wave theory the diffraction efficiency is calculated for thick phase transmission holographic gratings taking into account the chemical processing of the recording material. Three effects of processing are considered: variations in the average refractive…

The experimental results of diffraction efficiency as a function of the geometrical disposition of recording beams in bleached silver halide transmission thick-holographic gratings are presented. Two variables have been used to relate these results with certain geometric parameters. These variables…

A model is proposed which allows us to obtain the diffraction efficiency of photopolymeric materials with a nonlinear response to the refraction index, using the equations on the evolution of copolymerization reactions as a base. The photochemical material being analysed…

The chromatic sensitivity of holographic optical elements for use in optical interconnect systems is quantified using an entropy merit function. The influence of broad-band illumination on axial irradiance and intensity is studied showing that the best imaging point obtained with…

A new model to describe the influences of chemical processing on thick holograms is presented. The model is based on three hypotheses about the behaviour of holographic recording material during processing. Thickness variations and shear-type effects that are due to…

When aberrations are small, it is possible to use wave aberration variance to obtain the position of the best image plane in both conventional and holographic optical systems. However, when aberrations increase, this measurement is not sufficient and it does…

Three numerical methods for calculating the point spread function for holographic optical elements in the presence of aberrations are analyzed. The starting point for the analytical formulation of the diffraction theory of aberrations for holographic optical elements is the Fresnel-Kirchhoff…