No aplica | (2) |
UF resins; UMF resins; Wood composite boards; Formaldehyde emission | (2) |
13C solid state NMR spectroscopy; Lignin; Wood fiber; Wet blue leather; Chemical connections; MDF | (1) |
: Melamine-urea-formaldehyde resin; Melamine addition stage; Performance; Curing behavior; Activation energy | (1) |
: Retrotechnology; Sustainable development; Trends; The next big thing; Ecobionanotech | (1) |
Más... |
1.
|
Delignification of Phragmites karka – a Wetland Grass – by Soda Pulping Process Kumar, Lalit; Indian Institute of Technology Roorkee, Saharanpur Campus, Department of Paper Technology - Dutt, Dharm; Indian Institute of Technology Roorkee, Saharanpur Campus, Department of Paper Technology - Bharti, Amit; Indian Institute of Technology Roorkee, Saharanpur Campus, Department of Paper Technology
|
2.
|
Impact of Pulp Consistency on Refining Process Conducted under Constant Intensity Determined by SEL and SEC Factors Olejnik, Konrad; Institute of Papermaking and Printing, Lodz University of Technology
|
3.
|
Modified Cocoa Pod Husk-Filled Polypropylene Composites by Using Methacrylic Acid Koay, Seong Chun; Division of Polymer Engineering, School of Materials Engineering, Universiti Malaysia Perlis, 02600, Jejawi, Perlis, Malaysia - Husseinsyah, Salmah; Division of Polymer Engineering, School of Materials Engineering, Universiti Malaysia Perlis, 02600, Jejawi, Perlis, Malaysia - Osman, Hakimah; Division of Polymer Engineering, School of Materials Engineering, Universiti Malaysia Perlis, 02600, Jejawi, Perlis, Malaysia
|
4.
|
Covalent Immobilization of Lipase onto Citric Acid-Esterified Loofah Sponge Zhu, Jun; College of Life Science, Anhui Normal University, Wuhu - Zhang, Jian; College of Life Science, Anhui Normal University, Wuhu - Lai, Qiumei; College of Life Science, Anhui Normal University, Wuhu - Jiang, Bo; State Key Laboratory of Food Science and Technology, Jiangnan University - Gong, Renmin; College of Life Science, Anhui Normal University, Wuhu
|
5.
|
Performance of Copper-Ethanolamine-impregnated Scots Pine Wood during Exposure to Terrestrial Microorganisms Thaler, Nejc; University of Ljubljana, Biotechnical Faculty - Lesar, Boštjan; Montazna gradnja Tadej Zimic s.p - Humar, Miha; University of Ljubljana, Biotechnical Faculty
|
6.
|
Removal of Cu(II) from Ethanol Fuel Using Mandarin Peel as Biosorbent Ribeiro, Gabriela Costa; University of Uberlandia - Coelho, Luciana Melo; University of Goiás - Oliveira, Eliezer; University of Uberlandia - Coelho, Nívia M. M.; University of Uberlandia
|
7.
|
Effect of Environmental Conditions on the Mechanical Properties and Fungal Degradation of Polycaprolactone/ Microcrystalline Cellulose/Wood Flour Composites Sabo, Ronald; USDA Forest Service Forest Products Laboratory - Jin, Liwei; Institute of Chemical Industry of Forest Products, Chinese Academy of Forestry - Stark, Nicole; USDA Forest Service Forest Products Laboratory - Ibach, Rebecca E.; USDA Forest Service Forest Products Laboratory
|
8.
|
Mechanical Properties Evaluation of Coir Toughened Unsaturated Polyester with Different Reinforced Body Forms Yao, Jia; College of Mechanical Engineering, Jiamusi University, 154007, Jiamusi, China - Lu, Wei; College of Mechanical Engineering, Jiamusi University, 154007, Jiamusi, China - Rong, Shoufan; College of Material Engineering, Jiamusi University, 154007, Jiamusi, China - Hu, Yingcheng; Key Laboratory of Bio-based Material Science and Technology of Ministry of Education of China, College of Material Science and Engineering, Northeast Forestry University, Harbin,150040, China
|
9.
|
Changes in Temperature and Moisture Content in Beech Wood Plasticized by Microwave Heating Gašparík, Miroslav; Czech University of Life Sciences Prague Faculty of Forestry and Wood Sciences - Gaff, Milan; Technical University in Zvolen Faculty of Wood Sciences and Technology and Czech University of Life Sciences Prague Faculty of Forestry and Wood Sciences
|
10.
|
Bio-oil and Biochar as Additional Revenue Streams in South American Kraft Pulp Mills Hamaguchi, Marcelo; Lappeenranta University of Technology - Saari, Jussi; Lappeenranta University of Technology - Vakkilainen, Esa; Lappeenranta University of Technology
|
11.
|
Neutral Sulfite Treatment of Lignocellulosic Pulps Warsta, Elina; Aalto University, Department of Forest Products Technology - Vuorinen, Tapani; Aalto University, Department of Forest Products Technology
|
12.
|
Developing Environmentally Friendly Wood Composite Panels by Nanotechnology Candan, Zeki; Istanbul University - Akbulut, Turgay; Istanbul University
|
13.
|
Biomass Gasification in an Air-Blown Down-Draft Gasifier: Determination of Tar Compounds from Producer Gas Romar, Henrik; Kokkola University Consortium Chydenius - Pekka, Tynjälä; Kokkola University Consortium Chydenius Oulu University - Lassi, Ulla; Kokkola University Consortium Chydenius Oulu University
|
14.
|
Modeling of the Mechanical Properties of a Wood-Fiber/Bicomponent-Fiber Composite van Dyk, Herman; Department of Forest Biomaterials, North Carolina State University - Peralta, Perry; Department of Forest Biomaterials, North Carolina State University - Peszlen, Ilona; Department of Forest Biomaterials, North Carolina State University
|
15.
|
A Novel Method for the Determination of Hydrogen Peroxide in Bleaching Effluents by Spectroscopy Zhang, Qian; South China University of Technology - Fu, Shiyu; South China University of Technology - Li, Hailong; South China University of Technology - Liu, Yu; Shandong Polytechnic University
|
16.
|
Direct Synthesis of Gold Nanocatalysts on TEMPO-oxidized Pulp Paper Containing Aldehyde Groups Azetsu, Akihiro; Kyushu University - Koga, Hirotaka; Osaka University - Yuan, Lu-Yang; Kyushu University - Kitaoka, Takuya; Kyushu University
|
17.
|
The Development of Stresses during the Shaping of the Surface of Aspen Wood and Their Impact on the Quality of the Surface Gaff, Milan; Technical University in Zvolen, Faculty of Wood Science and Technology and Czech University of Life Sciences Prague, Faculty of Forestry and Wood Sciences - Gašparík, Miroslav; Czech University of Life Sciences Prague Faculty of Forestry and Wood Sciences
|
18.
|
Optimization of Multi-enzyme Production by Fungi Isolated from Palm Kernel Expeller using Response Surface Methodology Chen, Wei Li; Institute Tropical Agriculture, University Putra Malaysia - Liang, Juan Boo; Institute Tropical Agriculture, University Putra Malaysia - Jahromi, Mohammed Fasaleh; Institute Tropical Agriculture, University Putra Malaysia - Ho, Yin Wan; Institute bioscience, University Putra Malaysia - Abdullah, Norhani; Institute Tropical Agriculture, University Putra Malaysia
|
19.
|
Effect of Specimen Configuration and Lamination Construction on the Measurement of the In-plane Shear Modulus of Plywood Obtained by the Asymmetric Four-point Bending Test Yoshihara, Hiroshi; Shimane University - Kondo, Hiroki; Faculty of Science and Engineering, Shimane University, Nishikawazu-cho 1060, Matsue, Shimane 690-8504, Japan
|
20.
|
Analysis of Interactions between Colloidal Wood Pitch and Various Mineral Particles by Flow Cytometry Strand, Anders; Åbo Akademi University - Lindqvist, Hanna; Åbo Akademi University - Vähäsalo, Lari; Åbo Akademi University - Blomquist, Markus; FP-Pigments Oy - Sundberg, Anna; Åbo Akademi University
|
21.
|
Fast Acidogenic Fermentation of Corn Stover Through a Two-Step Method: Nitric Acid Hydrolysis Combined with the Fermentation of Hydrolysate Zhang, Rui; School of Energy and Safety Engineering, Tianjin Institute of Urban Construction, Tianjin 300384, China - Liu, Fengguo; School of Energy and Safety Engineering, Tianjin Institute of Urban Construction, Tianjin 300384, China - Liu, Hanqiao; School of Energy and Safety Engineering, Tianjin Institute of Urban Construction, Tianjin 300384, China
|
22.
|
Comparative Study on the Effect of Bentonite or Feldspar Filled Low-Density Polyethylene/Thermoplastic Sago Starch/Kenaf Core Fiber Composites Sarifuddin, Norshahida; Universiti Sains Malaysia (USM) - Ismail, Hanafi; Universiti Sains Malaysia (USM); Clusters for Polymer Composites (CPC), Science and Engineering Research Centre (SERC), USM Engineering Campus, 14300 Nibong Tebal, Penang, Malaysia
|
23.
|
Valorization of Wood Resources for the Cutting of Decorative Veneer in the Context of Sustainable Development of Romanian Forests Dumitrascu, Adela-Eliza; Transilvania University of Brasov - Ciobanu, Valentina D.; Transilvania University of Brasov - Lepadatescu, Badea; Transilvania University of Brasov
|
24.
|
Characterization of Physically Activated Acacia mangium Wood-Based Carbon for the Removal of Methyl Orange Dye Danish, Mohammed; Universiti Sains Malaysia - Hashim, Rokiah; Universiti Sains Malaysia - Ibrahim, Mohamad Nasir Mohamad; Universiti Sains Malaysia - Sulaiman, Othman; Universiti Sains Malaysia
|
25.
|
The Effect of Heat Treatment on the Withdrawal Capacity of Screws in Spruce Wood Kariz, Mirko; University of Ljubljana - Kuzman, Manja Kitek; University of Ljubljana - Sernek, Milan; University of Ljubljana
|
26.
|
Two-Stage Fractionation of Hardwoods Tunc, Mehmet Sefik; American Process Inc. - Chheda, Juben; Shell Global Solutions (US) Inc. - van der Heide, Evert; Shell Global Solutions International B.V., - Morris, Jerry; Shell Global Solutions (US) Inc. - van Heiningen, Adriaan; University of Maine
|
27.
|
Selective TEMPO-Mediated Oxidation of Thermomechanical Pulp Ma, Pu; Jiangsu Provincial Key Lab of Pulp and Paper Science and Technology, Nanjing Forestry University - Zhai, Huamin; Jiangsu Provincial Key Lab of Pulp and Paper Science and Technology, Nanjing Forestry University, Nanjing 210037, China
|
28.
|
Effect of High Solids Loading on Bacterial Contamination in Lignocellulosic Ethanol Production Ishola, Mofoluwake M.; University of Borås, Sweden. - Babapour, Ayda Barid; University of Borås, Sweden. - Gavitar, Maryam Nadalipour; University of Borås, Sweden. - Brandberg, Tomas; University of Borås, Sweden. - Taherzadeh, Mohammad J.; University of Borås, Sweden.
|
29.
|
Low Mole Ratio Urea–Melamine–Formaldehyde Resins Entailing Increased Methylene-Ether Group Contents and Their Formaldehyde Emission Potentials of Wood Composite Boards Mao, An; Department of Forest Products, Mississippi State University - Hassan, El Barbary; Department of Forest Products, Mississippi State University - Kim, Moon G.; Mississippi State University
|
30.
|
Efficient Conversion of Maltose into Sorbitol over Magnetic Catalyst in Extremely Low Acid Zhang, Jun; State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou, Guangdong, 510640, China - Li, Jibiao; State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou, Guangdong, 510640, China - Wu, Shubin; State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou, Guangdong, 510640, China - Liu, Ying; State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou, Guangdong, 510640, China
|
31.
|
Experimental Assessment of Hygrothermal Performance of Wood Frame Wall System in Suzhou's Lake Tai Climate Zone Wang, Xiaohuan; Beijing Forestry Machinery Research Institute of the State Forestry Administration, Beijing 100091, China - Fei, Benhua; International Centre for Bamboo and Rattan, Beijing, 100102, China - Ni, Jun; Suzhou Crownhomes Co., Ltd., Jiangsu, 215105, China
|
32.
|
Effect of Pretreatment of Raw Material on Properties of Particleboard Panels Made from Wheat Straw Bekhta, Pavlo; National University of Forestry and Wood Technology of Ukraine - Korkut, Suleyman; Duzce University, Duzce -Turkey - Hiziroglu, Salim; Oklahoma State University
|
33.
|
Reconsidering the Concept of Dry Surface Treatment of Cellulosic Paper to Produce Coated Paper Products Yang, Fei; State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou 510640, China - Shen, Jing; Key Laboratory of Bio-based Material Science and Technology of Ministry of Education, Material Science and Engineering College, Northeast Forestry University, Harbin 150040, China
|
34.
|
Biobleaching of Wheat Straw Pulp using Laccase and Xylanase Xu, Guilong; State Key Lab of Pulp and Paper Engineering, South China University of Technology - Wang, Xiwen; State Key Lab of Pulp and Paper Engineering, South China University of Technology - Hu, Jian; State Key Lab of Pulp and Paper Engineering, South China University of Technology
|
35.
|
Determination of the Surface Roughness of Heat-Treated Wood Materials Planed by the Cutters of a Horizontal Milling Machine Budakçı, Mehmet; Department of Wood Works Industrial Engineering, Faculty of Technology, Duzce University;81620, Duzce, Turkey - İlçe, Abdullah Cemil; Department of Wood Works Industrial Engineering, Faculty of Technology, Duzce University;81620, Duzce, Turkey - Gürleyen, Tuğba; Department of Furniture and Decoration, Vocational High School, Duzce University, 81100, Duzce, Turkey - Utar, Mustafa; Department of Furniture and Interior Design , Bunyan Technical Vocational High School, 38600, Kayseri, Turkey
|
36.
|
One-Step Heterogeneous Catalytic Process for the Dehydration of Xylan into Furfural Li, Hui-Ling; South China University of Technology - Wang, Shuai-Yang; South China University of Technology - Wang, Wen-Ju; South China University of Technology - Ren, Jun-Li; South China University of Technology - Peng, Feng; Beijing Forestry University - Sun, Run-Cang; South China University of Technology - Liang, Lei; Guangzhou Sugarcane Industry Research Institute
|
37.
|
Micromechanics of Mechanical, Thermomechanical, and Chemi-Thermomechanical Pulp from Orange Tree Pruning as Polypropylene Reinforcement: A Comparative Study Reixach, Rafel; University of Girona - Franco-Marquès, Elena; University of Girona - El Mansouri, Nour-Eddine; University of Girona - Ramirez de Cartagena, Francisco; University of Girona - Arbat, Gerard; University of Girona - Espinach, Francesc X.; University of Girona - Mutjé, Pere; University of Girona
|
38.
|
Simultaneous Separation and Quantification of Linear Xylo- and Cello-Oligosaccharides Mixtures in Lignocellulosics Processing Products on High-Performance Anion-Exchange Chromatography Coupled with Pulsed Amperometric Detection Xu, Yong; College of Chemical Engineering, Nanjing Forestry University, Nanjing 210037 China; Key Laboratory of Forest Genetics & Biotechnology, Ministry of Education of China - Fan, Li; College of Chemical Engineering, Nanjing Forestry University, Nanjing 210037 China; Key Laboratory of Forest Genetics & Biotechnology, Ministry of Education of China - Wang, Xing; College of Chemical Engineering, Nanjing Forestry University, Nanjing 210037 China; Key Laboratory of Forest Genetics & Biotechnology, Ministry of Education of China - Yong, Qiang; College of Chemical Engineering, Nanjing Forestry University, Nanjing 210037 China; Key Laboratory of Forest Genetics & Biotechnology, Ministry of Education of China - Yu, Shi-Yuan; College of Chemical Engineering, Nanjing Forestry University, Nanjing 210037 China; Key Laboratory of Forest Genetics & Biotechnology, Ministry of Education of China
|
39.
|
Application of Mechanical Models to Flax Fiber /Wood Fiber/ Plastic Composites Cao, Yan; Key Laboratory of Bio-based Material Science & Technology of Ministry of Education, Northeast Forestry University, Harbin, 150040, China - Wang, Weihong; Key Laboratory of Bio-based Material Science & Technology of Ministry of Education, Northeast Forestry University, Harbin, 150040, China - Wang, Qingwen; Key Laboratory of Bio-based Material Science & Technology of Ministry of Education, Northeast Forestry University, Harbin, 150040, China - Wang, Haigang; Key Laboratory of Bio-based Material Science & Technology of Ministry of Education, Northeast Forestry University, Harbin, 150040, China
|
40.
|
The Impact of Synthesis Conditions on the Structure and Properties of Di-(Stearylamidoethyl) Epoxypropyl Ammonium Chloride Xu, Mei; Jiangsu Provincial Key Lab of Pulp and Paper Science and Technology, Nanjing Forestry University, Nanjing Jiangsu - Xu, Mengdie; Jiangsu Provincial Key Lab of Pulp and Paper Science and Technology, Nanjing Forestry University, Nanjing Jiangsu - Dai, Hongqi; Jiangsu Provincial Key Lab of Pulp and Paper Science and Technology, Nanjing Forestry University, Nanjing Jiangsu - Wang, Shumei; Jiangsu Provincial Key Lab of Pulp and Paper Science and Technology, Nanjing Forestry University, Nanjing Jiangsu - Wu, Weibing; Jiangsu Provincial Key Lab of Pulp and Paper Science and Technology, Nanjing Forestry University, Nanjing Jiangsu
|
41.
|
Influence of Chemical Components of Oil Palm on Properties of Binderless Particleboard Lamaming, Junidah; Universiti Sains Malaysia - Sulaiman, Othman; Universiti Sains Malaysia - Sugimoto, Tomoko; Japan International Research Center of Agricultural Sciences - Hashim, Rokiah; Universiti Sains Malaysia - Said, Norafizah; Universiti Sains Malaysia - Sato, Masatoshi; The University of Tokyo
|
42.
|
Improved Fiber Separation and Energy Reduction in Thermomechanical Pulp Refining Using Enzyme-Pretreated Wood Pelletier, Andre Lucien; University of New Brunswick - Zhao, Yu; University of New Brunswick - Lei, Xiaochun; University of New Brunswick - Li, Kecheng; University of New Brunswick
|
43.
|
Electromagnetic-shielding, Wood-based Material Created Using a Novel Electroless Copper Plating Process Wang, Lijuan; Key Laboratory of Bio-based Material Science and Technology of Ministry of Education, Northeast Forestry University, 26 Hexing Road, Harbin 150040, P.R. China - Li, Jian; Key Laboratory of Bio-based Material Science and Technology of Ministry of Education, Northeast Forestry University, 26 Hexing Road, Harbin 150040, P.R. China
|
44.
|
Physical and Mechanical Properties of Hydroxypropyl Methylcellulose–Coated Paper as Affected by Coating Weight and Coating Composition Khwaldia, Khaoula; Institut National de Recherche et d’Analyse Physico-chimique (INRAP)
|
45.
|
Influence of Microwave Heating on the Liquefaction Kinetics of Corn Stover in Ethylene Glycol Li, Zhenning; College of Engineering, China Agricultural University - Han, Lujia; College of Engineering, China Agricultural University - Xiao, Weihua; College of Engineering, China Agricultural University
|
46.
|
Application of Citrus sinensis Solid Waste as a Pseudo-Catalyst for Free Cyanide Conversion under Alkaline Conditions Santos, Bruno Alexandre Quistorp; Cape Peninsula university of Technology - Ntwampe, Seteno Karabo Obed; Faculty of Applied Sciences, Department of Agriculture and Food Sciences: Biotechnology, Cape Peninsula University of Technology, PO Box 652, Cape Town 8000, South Africa - Doughari, James Hamuel; Faculty of Applied Sciences, Department of Agriculture and Food Sciences: Biotechnology, Cape Peninsula University of Technology, PO Box 652, Cape Town 8000, South Africa - Muchatibaya, Gift; Faculty of Applied Sciences, Department of Agriculture and Food Sciences: Biotechnology, Cape Peninsula University of Technology, PO Box 652, Cape Town 8000, South Africa
|
47.
|
Study of Ni/Char Catalyst for Biomass Gasification in an Updraft Gasifier: Influence of Catalyst Granular Size on Catalytic Performance Wang, Duo; Xiamen University
|
48.
|
Hemicellulose Extraction from South African Eucalyptus grandis using Green Liquor and its Impact on Kraft Pulping Efficiency and Paper Making Properties Johakimu, Jonas; Forestry and Forest products Research Centre, Council for Scientific and Industrial Research of South Africa - Andrew, Jerome; Forestry and Forest products Research Centre, Council for Scientific and Industrial Research of South Africa
|
49.
|
Preparation of Lignin-Based Anion Exchangers and their Utilization for Nitrate Removal Wang, Zhen; Key Laboratory of Pulp & Paper Science and Technology, Ministry of education, Shandong Polytechnic University - Bo, Nana; Key Laboratory of Pulp & Paper Science and Technology, Ministry of education, Shandong Polytechnic University - Liu, Yu; Key Laboratory of Pulp & Paper Science and Technology, Ministry of education, Shandong Polytechnic University - Yang, Guihua; Key Laboratory of Pulp & Paper Science and Technology, Ministry of education, Shandong Polytechnic University - Liu, Ying; Key Laboratory of Pulp & Paper Science and Technology, Ministry of education, Shandong Polytechnic University - Zhao, Yuan; Chemical Department of Chengde Petroleum College
|
50.
|
Hydrotropic Fractionation of Birch Wood into Cellulose and Lignin: A New Step Towards Green Biorefinery Gabov, Konstantin; Åbo Akademi University - Fardim, Pedro; Åbo Akademi University - Gomes da Silva Júnior, Francides; University of Sao Paulo
|