| Título: | The Rheological Properties of Oil-Based Mud under High Pressure and High Temperature Conditions |
| Autores: | Amani, Mahmood; Texas A&M University at Qatar |
| Fecha: | 2012-06-30 |
| Publicador: | Advances in Petroleum Exploration and Development |
| Fuente: |
 |
| Tipo: |
info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion Peer-reviewed Article |
| Tema: |
High pressure high temperature; Oil-based mud; Rheology; Rheological properties |
| Descripción: | Designing a proper drilling fluid that can function properly under the conditions of High-Pressure, High-Temperature (HP/HT) operations is very challenging. Among these challenges is the alteration of the rheological properties of drilling fluid due to the high temperature and high pressure (Ibeh et. al, 2007). This work investigates the rheological behavior of oil-based drilling fluids with different properties at Ultra-HP/HT conditions using a state-of-the-art viscometer capable of measuring drilling fluids properties up to 600°F and 40,000 psi. For this purpose, two actual oil based mud samples used by industry with the same mud weight (12.5 ppg) were chosen to carry out a matrix of experiments. The results of this study led to concluding that the viscosity, yield point and gel strength decrease with increasing temperature (until the mud sample fails, for oil-based mud with regular formulation). This behavior is the result of the thermal degradation of the solid, polymers, and other components of the mud samples and the expansion of the molecular distances which will lower the resistance of the fluid to flow and, hence, its viscosity, yield point, and gel strength. Moreover, it is concluded that the viscosity and yield point increase as the pressure increases. Pressure’s effect on these parameters, however, is more apparent at low temperature (below failure point, for oil-based mud with regular formulation).Key words: High pressure high temperature; Oil-based mud; Rheology; Rheological properties |
| Idioma: | Inglés |
1 Economic Analysis of Liquefied Natural Gas Floating Production Storage and Offloading Plant (LNG FPSO) Using Probabilistic Approach por N. Edwin, Lazson; Department of Petroleum and Gas Engineering, University of Port Harcourt,S. Sunday, Ikiensikimama; Department of Petroleum and Gas Engineering, University of Port Harcourt | 6 Design and Operational Procedures for a Locally Made Steam Distillation Apparatus por Hosein, Raffie; Chemical Engineering Department, The University of the West Indies, St Augustine,Lewis-Hosein, Rhonda; Chemical Engineering Department, The University of the West Indies, St Augustine |
2 The Effects of Pore Pressure and Temperature Difference Variation on Borehole Stability por Chi, AI; Key Laboratory of Education Ministry for Enhanced Oil Recovery, Northeast Petroleum University, Daqing, Hei Longjiang Province, China.,Yuwei, LI; Key Laboratory of Education Ministry for Enhanced Oil Recovery, Northeast Petroleum University, Daqing, Hei Longjiang Province, China.,Yu, LIU; Key Laboratory of Education Ministry for Enhanced Oil Recovery, Northeast Petroleum University, Daqing, Hei Longjiang Province, China. | 7 Contents por Chao, Jamie |
3 Study on Matching Ability Between Cement Particle Size and Permeability in the Process of Oil Reservoir Plugging por ZHANG, Qingjie,WEI, Jianguang,SUN, Guojun,JIN, Liyang,GUAN, Pengjun | 8 Finite Volume Method for Solving a Modified 3-D 3-Phase Black-Oil Hydrocarbon Secondary Migration Model, and Its Application to the Kuqa Depression of the Tarim Basin in Western China por Guangren, SHI; Research Institute of Petroleum Exploration and Development, PetroChina,Jinshan, MA; Research Institute of Petroleum Exploration and Development, PetroChina,Xinshe, YANG; Mathematics and Scientiic Computing, National Physical Laboratory,Junhua, CHANG; Research Institute of Petroleum Exploration and Development, PetroChina,Jun, WAN; Research Institute of Petroleum Exploration and Development, PetroChina |
4 Determination of Non-Darcy Porous Flow Boundary Value in Formation Type III por Yikun, LIU; EOR key lab in the Ministry Of Education in Northeast Petroleum University.,Shuang, LIANG; EOR key lab in the Ministry Of Education in Northeast Petroleum University.,Lingyun, CHEN; EOR key lab in the Ministry Of Education in Northeast Petroleum University.,Fengjiao, WANG; EOR key lab in the Ministry Of Education in Northeast Petroleum University.,Yang, XUAN; Production Engineering Research Institute in Daqing Oil Field Co.,Qian, LIU; The second factory in Daqing Oil Field Co. | 9 SUBMISSION OF MANUSCRIPTS por Chao, Jamie |
5 Cotton Oil and Sunflower Oil Fuel Mixtures por Arapatsakos, Charalampos; Department of Production and Management Engineering, Democritus University of Thrace, V. Sofias Street, 67100, Xanthi , GREECE,Karkanis, Anastasios; Department of Production and Management Engineering, Democritus University of Thrace, V. Sofias Street, 67100, Xanthi , GREECE,Christoforidis, Dimitrios; Department of Production and Management Engineering, Democritus University of Thrace, V. Sofias Street, 67100, Xanthi , GREECE,Moschou, Marianthi; Department of Production and Management Engineering, Democritus University of Thrace, V. Sofias Street, 67100, Xanthi , GREECE,Pantokratoras, Ioannis; Department of Production and Management Engineering, Democritus University of Thrace, V. Sofias Street, 67100, Xanthi , GREECE | 10 Principal Points in Cementing Geothermal Wells por Salim, Prisca; Texas A&M University at Qatar,Amani, Mahmood; Texas A&M University at Qatar |