| Título: | Enhancing Tight Gas Recovery Through Hydraulic Fracture Treatment Design Optimization |
| Autores: |
Rahman, M. M.; The Petroleum Institute, Abu Dhabi, UAE. Sarma, H. K.; The Petroleum Institute, Abu Dhabi, UAE. |
| Fecha: | 2013-06-30 |
| Publicador: | Advances in Petroleum Exploration and Development |
| Fuente: |
 |
| Tipo: |
info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion Peer-reviewed Article |
| Tema: |
Stimulation; Enhanced recovery; Fracture optimization; Tight gas; Treatment design |
| Descripción: | Tight and deep unconventional gas reservoirs are becoming targets for development but the conventional approach to develop them is not feasible. In most cases, they cannot be produced economically without hydraulic fracturing. There have been much progress in the overall hydraulic fracturing procedures to stimulate tight formation, but there is still a lack in treatment-design optimization. Some of the currently available commercial software do not take into consideration several key parameters and associated realistic constraints.An integrated model to optimize hydraulic fracture treatment has been developed to enhance gas production and net present value with minimum treatment cost. This model couples with the industry experience with hydraulic fracture mechanics. Unlike commercial software, important design parameters are included. The free design variables are randomly varied during optimization. The overall hydraulic fracturing design problem is viewed as a multi-objective and multivariate system design problem, which recognizes complex interactions between a hydraulically coupled fracture geometry model, a hydrocarbon production model and an investment-return cash flow model. The integrated model has been successfully applied to a hypothetical deeper tight gas formation to demonstrate its merits. The optimum treatment design indicates a 300% increment in production over 10 years at a lower cost compared to production from non-fractured tight gas sand. This optimization scheme presents a decision support system, which provides a goal-oriented optimum design in a conflicting environment.Key words: Stimulation; Enhanced recovery; Fracture optimization; Tight gas; Treatment design |
| Idioma: | Inglés |
1 Economic Analysis of Liquefied Natural Gas Floating Production Storage and Offloading Plant (LNG FPSO) Using Probabilistic Approach por N. Edwin, Lazson; Department of Petroleum and Gas Engineering, University of Port Harcourt,S. Sunday, Ikiensikimama; Department of Petroleum and Gas Engineering, University of Port Harcourt | 6 Design and Operational Procedures for a Locally Made Steam Distillation Apparatus por Hosein, Raffie; Chemical Engineering Department, The University of the West Indies, St Augustine,Lewis-Hosein, Rhonda; Chemical Engineering Department, The University of the West Indies, St Augustine |
2 The Effects of Pore Pressure and Temperature Difference Variation on Borehole Stability por Chi, AI; Key Laboratory of Education Ministry for Enhanced Oil Recovery, Northeast Petroleum University, Daqing, Hei Longjiang Province, China.,Yuwei, LI; Key Laboratory of Education Ministry for Enhanced Oil Recovery, Northeast Petroleum University, Daqing, Hei Longjiang Province, China.,Yu, LIU; Key Laboratory of Education Ministry for Enhanced Oil Recovery, Northeast Petroleum University, Daqing, Hei Longjiang Province, China. | 7 Contents por Chao, Jamie |
3 Study on Matching Ability Between Cement Particle Size and Permeability in the Process of Oil Reservoir Plugging por ZHANG, Qingjie,WEI, Jianguang,SUN, Guojun,JIN, Liyang,GUAN, Pengjun | 8 Finite Volume Method for Solving a Modified 3-D 3-Phase Black-Oil Hydrocarbon Secondary Migration Model, and Its Application to the Kuqa Depression of the Tarim Basin in Western China por Guangren, SHI; Research Institute of Petroleum Exploration and Development, PetroChina,Jinshan, MA; Research Institute of Petroleum Exploration and Development, PetroChina,Xinshe, YANG; Mathematics and Scientiic Computing, National Physical Laboratory,Junhua, CHANG; Research Institute of Petroleum Exploration and Development, PetroChina,Jun, WAN; Research Institute of Petroleum Exploration and Development, PetroChina |
4 Determination of Non-Darcy Porous Flow Boundary Value in Formation Type III por Yikun, LIU; EOR key lab in the Ministry Of Education in Northeast Petroleum University.,Shuang, LIANG; EOR key lab in the Ministry Of Education in Northeast Petroleum University.,Lingyun, CHEN; EOR key lab in the Ministry Of Education in Northeast Petroleum University.,Fengjiao, WANG; EOR key lab in the Ministry Of Education in Northeast Petroleum University.,Yang, XUAN; Production Engineering Research Institute in Daqing Oil Field Co.,Qian, LIU; The second factory in Daqing Oil Field Co. | 9 SUBMISSION OF MANUSCRIPTS por Chao, Jamie |
5 Cotton Oil and Sunflower Oil Fuel Mixtures por Arapatsakos, Charalampos; Department of Production and Management Engineering, Democritus University of Thrace, V. Sofias Street, 67100, Xanthi , GREECE,Karkanis, Anastasios; Department of Production and Management Engineering, Democritus University of Thrace, V. Sofias Street, 67100, Xanthi , GREECE,Christoforidis, Dimitrios; Department of Production and Management Engineering, Democritus University of Thrace, V. Sofias Street, 67100, Xanthi , GREECE,Moschou, Marianthi; Department of Production and Management Engineering, Democritus University of Thrace, V. Sofias Street, 67100, Xanthi , GREECE,Pantokratoras, Ioannis; Department of Production and Management Engineering, Democritus University of Thrace, V. Sofias Street, 67100, Xanthi , GREECE | 10 Principal Points in Cementing Geothermal Wells por Salim, Prisca; Texas A&M University at Qatar,Amani, Mahmood; Texas A&M University at Qatar |