- Inicio
- Atrás
|
Título: |
Estudio del comportamiento de cables amarrados con prensacables Study of the behavior of tied cables with clips |
Autores: |
Takeuchi Tam Caori Patricia |
Fecha: |
2003-08-01 |
Publicador: |
Ingeniería e investigación |
Fuente: |
|
Tipo: |
|
Tema: |
Ingeniería Civil prensacable, cable, carga de rotura Civil Engineering clip, cable, maxim load |
Descripción: |
Hay numerosas estructuras con cables, tales como puentes colgantes y torres con riendas. Para amarrar dichos cables es común el uso de presacables en sus extremos. En este artículo se muestran los resultados de una investigación, realizada en el Departamento de Ingeniería Civil, sobre el comportamiento de cables amarrados con prensacables disponibles en el mercado nacional, dependiendo de la cantidad de prensacables colocada en cada extremo del cable y la forma de colocación. También se presenta el comportamiento de prensacables reutilizados. There are a great quantity of structures with cables, such as hanging bridges and towers with cables. To tie this cables it is common to use clips in their ends. In this paper, appear the results of one investigation carried out in the Departament of Civil Engineering, about the behavior of cables tied with available clips in the domestic market, depending on the quantity of clips placed in each end of the cable and the placement form. Also the behavior of clips used more than on time is presented here. |
Idioma: |
Español |