| Título: | Impact of the control constraint on a buck converter design based on multi-objective optimization procedure |
| Autores: |
Larouci, Cherif; ESTACA engineering school, Control and system laboratory Ejjabraoui, Kamal; ESTACA engineering school, Control and system laboratory Lefranc, Pierre; SUPELEC engineering school, Energy Department, France Marchand, Claude; SUPELEC, university Paris 11, Electrical engineering laboratory of Paris |
| Fecha: | 2012-06-25 |
| Publicador: | International journal of power electronics and drive systems |
| Fuente: |
 |
| Tipo: |
info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion |
| Tema: | No aplica |
| Descripción: | The current paper deals with a multi-objective design approach of power converters applied to a DC-DC buck structure. This approch consists on optimizing a preselected power architecture by minimizing a multi-objective function (volume and time response) under multi-physic constraints (efficiency, thermal, electromagnetic compatibility and control). This multi-objective optimization allows evaluating the impact of the control aspect on the converter design by considering the control criteria with the same importance as the conventional constraints. The obtained results confirm the influence of the control on the converter design parameters. They help the designer to choose suitable operating points depending on the desired performances in terms of volume and time response while respecting efficiency, junction temperatures and electromagnetic compatibility constraints. |
| Idioma: | Inglés |
1 Simulation of a Transient Fault Controller for a Grid Connected Wind Farm with Different Types of Generators por Abdel-Mageed, Helmy Mohammed; Helwan University,Sharaf, S.M.,El_masry, S.M.,El_harony, M.; Helwan University | 6 Performance Comparison of Starting Speed Control of Induction Motor por Kusbianto, Deddy |
2 Unified Power Quality Conditioner for voltage sag and harmonic mitigation of nonlinear loads por Latha, Y. Kusuma; Lakireddy Balireddy College of Engineering (Autonomous),Saibabu, Ch.; University College of Engineering (Autonomous),Obulesu, Y P; Lakireddy Balireddy College of Engineering(Autonomous) | 7 Fault Tolerant Control in Z-Source Inverter Fed Induction Motor por Rabi, B. Justus |
3 Dynamic Testing & Simulation of 4 KW (5.5 Hp) Switched Reluctance Motor using PSpice por Autee, Rajesh Murlidharrao; Marathwada Shikshan Prasarak Mandal's Deogiri Technical Campus for Engineeing & Mgt Studies, Aurangabad. Aff-Dr. B.A.M.University, Aurangabad-India. | 8 Hysteresis Current Control technique based on Space Vector Modulation for Active Power Filter por Yun-liang, Wang,Qi-liang, Guo |
4 A Review of Voltage and Current Signature Diagnosis in Industrial Drives por Kumar, K. Vinoth | 9 A Novel method of Starting Induction Motor - A Comparative Study por Chakrasali, R L; SDM College of Engg.&Tech., Dharwad,Sheelavant, V.R.,Nagaraja, H.N. |
5 RNN Based Rotor Flux and Speed Estimation of Induction Motor por Purwahyudi, Bambang | 10 Regeneration of ZVS converter with Resonant inductor por Prasad, J.Sivavara,Babu, Ch.Sai,Obelesh, Y.P. |