| Título: | The Influence of Process Parameters on the Surface Roughness in Aesthetic Machining of Wooden Edge-Glued Panels (EGPs) |
| Autores: |
Sütçü, Abdullah; Suleyman Demirel University Karagöz, Ümmü; Kastamonu University |
| Fecha: | 2013-08-01 |
| Publicador: | Bioresources |
| Fuente: |
 |
| Tipo: |
info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion |
| Tema: | Surface roughness; Aesthetic machining; Wood edge-glued-panel (EGP); End-milling; Beech; Walnut; Chestnut |
| Descripción: | This study explored the effect of processing parameters on surface roughness as a result of aesthetic designs processed on walnut, chestnut, and beech wood edge-glued panels (EGPs) by CNC (computer numerical control) router. To accomplish this, the average roughness value (Ra) on an engraved surface in a Ying-Yang design treated on the material was measured. Using analysis of variance (ANOVA), the feed rate, spindle speed, step-over, and axial depth of cut factors; surface roughness factors; and the interactions between these factors were found to form significant differences at the level of 95%. At the end of the study, the Ra value was lower in walnut and beech EGPs (3.423 μm and 4.316 μm, respectively) and higher in chestnut EGPs (5.005 μm). |
| Idioma: | Inglés |