Título: Specific Energy Consumption Regression and Process Parameters Optimization in Wet-Briquetting of Rice Straw at Normal Temperature
Autores: Hu, Jianjun; Department of Mechanical & Electrical Engineering, Henan Agriculture University, Zhouzhou 450008,Henan,China
Lei, Tingzhou; Henan Academy of Sciences, Zhengzhou 450008,Henan,China
Shen, Shengqiang; School of Energy and Power Engineering, Dalian University of Technology, Dalian 116026,Liaoning China
Zhang, Quanguo; Department of Mechanical & Electrical Engineering, Henan Agriculture University, Zhouzhou 450008,Henan,China
Fecha: 2012-11-05
Publicador: Bioresources
Fuente:
Tipo: info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
Tema: Rice straw; Wet-briquetting; Specific energy consumption; Die length-diameter ratio; Die opening taper
Descripción: In the normal-temperature (20 to 25 °C) wet briquetting of straw, the lignin becomes softened and briquetted by means of friction heat from the briquetting at some compressing force and moisture ratio. With an electronic universal testing machine and a self-developed normal- temperature wet briquetting device, tests were carried out for normal-temperature wet briquetting of rice straws with different compressing rate, material moisture, die length-diameter ratio, and die opening taper, using a quadratic regression-orthogonal design. Based on the characteristic curves of normal-temperature wet briquetting, the specific energy consumption was calculated by stepped regression and then integration for summation. Thereby, a specific energy consumption model was established. Next, an interactive analysis was made between single-factor and two-factor designs. Optimal combination of factors, i.e. 17.3% moisture, 44.5 mm/min compressing rate, 45° die opening taper, and 5.3 die length-diameter ratio, were obtained while the specific energy consumption was minimized. Further, the work provided references for process parameters design of the normal-temperature wet briquetting device for straw.
Idioma: Inglés

Artículos similares:

COMPARATIVE STUDY OF LIPOPHILIC EXTRACTIVES OF HARDWOODS AND CORRESPONDING ECF BLEACHED KRAFT PULPS por Neto, Carlos Pascoal,Freire, Carmen Sofia,Pinto, Paula Cristina,Santiago, Ana Sofia,Silvestre, Armando Jorge,Evtuguin, Dmitry Victorovitch
IDENTIFICATION AND CHARACTERIZATION OF DIVERSE XYLANASES FROM THERMOPHILIC AND THERMOTOLERANT FUNGI por Ghatora, Sonia K.,Chadha, Bhupinder S.,Badhan, A. K.,Saini, H. S.,Bhat, M. K.
ENZYMES IMPROVE ECF BLEACHING OF PULP por Bajpai, Pratima,Anand, Aradhna,Sharma, Nirmal,Mishra, Shree P.,Bajpai, Pramod K.,Lachenal, Dominique
AN OVERVIEW OF THE AUSTRALIAN BIOMASS RESOURCES AND UTILIZATION TECHNOLOGIES por Moghtaderi, Behdad,Sheng, Changdong,Wall, Terry F.
10