Título: KINETICS OF BAGASSE DELIGNIFICATION BY USING HIGH-BOILING SOLVENT
Autores: Wang, Qiang
Chen, Kefu
Liu, Shanshan
Li, Jun
Xu, Jun
Fecha: 2011-04-29
Publicador: Bioresources
Fuente:
Tipo: info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
Tema: Black liquor; Delignification; High-boiling solvent; Bagasse
Descripción: Kinetic modeling of lignin removal under conditions of high-boiling solvent (HBS, i.e. 1,4-butanediol) auto-catalyzed pulping of bagasse has been studied. The experimental data were collected based on the absorption of dissolved lignin in black liquor at a wavelength of 320 nm, which can eliminate the interferences arising from furfural (F) and 5-hydroxymethyl furfural (HMF) generated during pulping. The results indicated that the delignification process consists of two distinct phases. The initial phase, involving a very fast reaction, is followed by a rather slow second phase. The delignification equation was determined as: D=87.71×C0.8982× (1-e-1.757t) ×100%, which is valid within an HBS concentration range of 50% to 80% and can be used for predict the lignin removal from bagasse by HBS pulping.
Idioma: Inglés

Artículos similares:

COMPARATIVE STUDY OF LIPOPHILIC EXTRACTIVES OF HARDWOODS AND CORRESPONDING ECF BLEACHED KRAFT PULPS por Neto, Carlos Pascoal,Freire, Carmen Sofia,Pinto, Paula Cristina,Santiago, Ana Sofia,Silvestre, Armando Jorge,Evtuguin, Dmitry Victorovitch
IDENTIFICATION AND CHARACTERIZATION OF DIVERSE XYLANASES FROM THERMOPHILIC AND THERMOTOLERANT FUNGI por Ghatora, Sonia K.,Chadha, Bhupinder S.,Badhan, A. K.,Saini, H. S.,Bhat, M. K.
ENZYMES IMPROVE ECF BLEACHING OF PULP por Bajpai, Pratima,Anand, Aradhna,Sharma, Nirmal,Mishra, Shree P.,Bajpai, Pramod K.,Lachenal, Dominique
AN OVERVIEW OF THE AUSTRALIAN BIOMASS RESOURCES AND UTILIZATION TECHNOLOGIES por Moghtaderi, Behdad,Sheng, Changdong,Wall, Terry F.
10