Título: The Effects of Borehole Ovality on Bare Hole Horizontal Well Completion String Tripping in Friction
Autores: Chi, AI; Northeast Petroleum University, Key Laboratory of Education Ministry for Enhanced Oil Recovery, Daqing, Hei Longjiang Province, China.
Yu, LIU; Northeast Petroleum University, Key Laboratory of Education Ministry for Enhanced Oil Recovery, Daqing, Hei Longjiang Province, China.
Yuwei, LI; Northeast Petroleum University, Key Laboratory of Education Ministry for Enhanced Oil Recovery, Daqing, Hei Longjiang Province, China.
Fecha: 2013-09-30
Publicador: Advances in Petroleum Exploration and Development
Fuente:
Tipo: info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
Peer-reviewed Article

Tema:
Borehole ovality; Completion string; Bare hole completion; Friction

Descripción: Under the effect of non-uniform ground stress, the borehole becomes oval. The deformation regulations and friction calculation in oval borehole has great difference with which in circular borehole. Researching the effect of the ovality of borehole on string tripping in friction is of great significance. In this paper, the string deformation model in oval borehole was established; the maximum displacement changes with different ratios of the major and minor axis and inclination angles were analyzed. The deformation model between two contacting points was established, and the determining method of the new contacting point of multi-packer completion string was proposed. The friction calculating model was established finally.The Hongping 9 well was used as an example to calculate the effect of borehole ovality on the bare hole completion string tripping in friction. By calculating, the friction calculated using the model was in good agreement with the measured value. The friction of completion string is almost zero in vertical section, and in blending and horizontal section the friction is increasing gradually. With the increasing of ovality the friction is increasing. The ovality increases from 1.0 to 1.3, the increasing value of friction is 36.59 kN.Key words: Borehole ovality; Completion string; Bare hole completion; Friction
Idioma: Inglés

Artículos similares:

Economic Analysis of Liquefied Natural Gas Floating Production Storage and Offloading Plant (LNG FPSO) Using Probabilistic Approach por N. Edwin, Lazson; Department of Petroleum and Gas Engineering, University of Port Harcourt,S. Sunday, Ikiensikimama; Department of Petroleum and Gas Engineering, University of Port Harcourt
Design and Operational Procedures for a Locally Made Steam Distillation Apparatus por Hosein, Raffie; Chemical Engineering Department, The University of the West Indies, St Augustine,Lewis-Hosein, Rhonda; Chemical Engineering Department, The University of the West Indies, St Augustine
The Effects of Pore Pressure and Temperature Difference Variation on Borehole Stability por Chi, AI; Key Laboratory of Education Ministry for Enhanced Oil Recovery, Northeast Petroleum University, Daqing, Hei Longjiang Province, China.,Yuwei, LI; Key Laboratory of Education Ministry for Enhanced Oil Recovery, Northeast Petroleum University, Daqing, Hei Longjiang Province, China.,Yu, LIU; Key Laboratory of Education Ministry for Enhanced Oil Recovery, Northeast Petroleum University, Daqing, Hei Longjiang Province, China.
Contents por Chao, Jamie
Finite Volume Method for Solving a Modified 3-D 3-Phase Black-Oil Hydrocarbon Secondary Migration Model, and Its Application to the Kuqa Depression of the Tarim Basin in Western China por Guangren, SHI; Research Institute of Petroleum Exploration and Development, PetroChina,Jinshan, MA; Research Institute of Petroleum Exploration and Development, PetroChina,Xinshe, YANG; Mathematics and Scientiic Computing, National Physical Laboratory,Junhua, CHANG; Research Institute of Petroleum Exploration and Development, PetroChina,Jun, WAN; Research Institute of Petroleum Exploration and Development, PetroChina
Determination of Non-Darcy Porous Flow Boundary Value in Formation Type III por Yikun, LIU; EOR key lab in the Ministry Of Education in Northeast Petroleum University.,Shuang, LIANG; EOR key lab in the Ministry Of Education in Northeast Petroleum University.,Lingyun, CHEN; EOR key lab in the Ministry Of Education in Northeast Petroleum University.,Fengjiao, WANG; EOR key lab in the Ministry Of Education in Northeast Petroleum University.,Yang, XUAN; Production Engineering Research Institute in Daqing Oil Field Co.,Qian, LIU; The second factory in Daqing Oil Field Co.
Cotton Oil and Sunflower Oil Fuel Mixtures por Arapatsakos, Charalampos; Department of Production and Management Engineering, Democritus University of Thrace, V. Sofias Street, 67100, Xanthi , GREECE,Karkanis, Anastasios; Department of Production and Management Engineering, Democritus University of Thrace, V. Sofias Street, 67100, Xanthi , GREECE,Christoforidis, Dimitrios; Department of Production and Management Engineering, Democritus University of Thrace, V. Sofias Street, 67100, Xanthi , GREECE,Moschou, Marianthi; Department of Production and Management Engineering, Democritus University of Thrace, V. Sofias Street, 67100, Xanthi , GREECE,Pantokratoras, Ioannis; Department of Production and Management Engineering, Democritus University of Thrace, V. Sofias Street, 67100, Xanthi , GREECE
10 
Principal Points in Cementing Geothermal Wells por Salim, Prisca; Texas A&M University at Qatar,Amani, Mahmood; Texas A&M University at Qatar