| Título: | Comparative Study of Using Oil-Based Mud Versus Water-Based Mud in HPHT Fields |
| Autores: |
Amani, Mahmood; Petroleum Engineering Program, Texas A&M University at Qatar Al-Jubouri, Mohammed; Petroleum Engineering Program, Texas A&M University at Qatar Shadravan, Arash; Petroleum Engineering Department, Texas A&M University |
| Fecha: | 2012-12-31 |
| Publicador: | Advances in Petroleum Exploration and Development |
| Fuente: |
 |
| Tipo: |
info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion Peer-reviewed Article |
| Tema: |
Oil-based mud; Water-based mud; HPHT fields |
| Descripción: | Growing demand for oil and gas is driving the exploration and production industry to look for new resources in un-explored areas, and in deeper formations. According to the Bureau of Ocean Energy Management, Regulation and Enforcement, former Minerals Management Service (MMS), over 50% of proven oil and gas reserves in the United States lie below 14,000 ft. subsea. In the Gulf of Mexico some wells were drilled at 27,000 ft below seabed with reservoir temperatures above 400 °F and reservoir pressures of 24,500 psi. As we drill into deeper formations we will experience higher pressures and temperatures.Drilling into deeper formation requires drilling fluids that withstand higher temperatures and pressures. The combined pressure-temperature effect on drilling fluid’s rheology is complex. This provides a wide range of difficult challenges and mechanical issues. This can have negative impact on rheological properties when exposed to high pressure high temperature (HPHT) condition and contaminated with other minerals, which are common in deep drilling. High Pressure and High Temperature (HPHT) wells have bottom hole temperatures of 300 °F (150 °C) and bottom hole pressures of 10,000 psi (69 MPa) or higher.Water-Based mud (WBM) and Oil-Based mud (OBM) are the most common drilling fluids currently used and both have several characteristics that qualify them for HPHT purposes. This paper compares the different characteristics of WBM and OBM to help decide the most suitable mud type for HPHT drilling by considering mud properties through several laboratory tests to generate some engineering guidelines. The tests were formulated at temperatures from 100 °F up to 600 °F and pressures from 5,000 psi to 25,000 psi. The comparison will mainly consider the rheological properties of the two mud types of mud and will also take into account the environmental feasibility of using them. Key words: Oil-based mud; Water-based mud; HPHT fields |
| Idioma: | Inglés |
1 Economic Analysis of Liquefied Natural Gas Floating Production Storage and Offloading Plant (LNG FPSO) Using Probabilistic Approach por N. Edwin, Lazson; Department of Petroleum and Gas Engineering, University of Port Harcourt,S. Sunday, Ikiensikimama; Department of Petroleum and Gas Engineering, University of Port Harcourt | 6 Design and Operational Procedures for a Locally Made Steam Distillation Apparatus por Hosein, Raffie; Chemical Engineering Department, The University of the West Indies, St Augustine,Lewis-Hosein, Rhonda; Chemical Engineering Department, The University of the West Indies, St Augustine |
2 The Effects of Pore Pressure and Temperature Difference Variation on Borehole Stability por Chi, AI; Key Laboratory of Education Ministry for Enhanced Oil Recovery, Northeast Petroleum University, Daqing, Hei Longjiang Province, China.,Yuwei, LI; Key Laboratory of Education Ministry for Enhanced Oil Recovery, Northeast Petroleum University, Daqing, Hei Longjiang Province, China.,Yu, LIU; Key Laboratory of Education Ministry for Enhanced Oil Recovery, Northeast Petroleum University, Daqing, Hei Longjiang Province, China. | 7 Contents por Chao, Jamie |
3 Study on Matching Ability Between Cement Particle Size and Permeability in the Process of Oil Reservoir Plugging por ZHANG, Qingjie,WEI, Jianguang,SUN, Guojun,JIN, Liyang,GUAN, Pengjun | 8 Finite Volume Method for Solving a Modified 3-D 3-Phase Black-Oil Hydrocarbon Secondary Migration Model, and Its Application to the Kuqa Depression of the Tarim Basin in Western China por Guangren, SHI; Research Institute of Petroleum Exploration and Development, PetroChina,Jinshan, MA; Research Institute of Petroleum Exploration and Development, PetroChina,Xinshe, YANG; Mathematics and Scientiic Computing, National Physical Laboratory,Junhua, CHANG; Research Institute of Petroleum Exploration and Development, PetroChina,Jun, WAN; Research Institute of Petroleum Exploration and Development, PetroChina |
4 Determination of Non-Darcy Porous Flow Boundary Value in Formation Type III por Yikun, LIU; EOR key lab in the Ministry Of Education in Northeast Petroleum University.,Shuang, LIANG; EOR key lab in the Ministry Of Education in Northeast Petroleum University.,Lingyun, CHEN; EOR key lab in the Ministry Of Education in Northeast Petroleum University.,Fengjiao, WANG; EOR key lab in the Ministry Of Education in Northeast Petroleum University.,Yang, XUAN; Production Engineering Research Institute in Daqing Oil Field Co.,Qian, LIU; The second factory in Daqing Oil Field Co. | 9 SUBMISSION OF MANUSCRIPTS por Chao, Jamie |
5 Cotton Oil and Sunflower Oil Fuel Mixtures por Arapatsakos, Charalampos; Department of Production and Management Engineering, Democritus University of Thrace, V. Sofias Street, 67100, Xanthi , GREECE,Karkanis, Anastasios; Department of Production and Management Engineering, Democritus University of Thrace, V. Sofias Street, 67100, Xanthi , GREECE,Christoforidis, Dimitrios; Department of Production and Management Engineering, Democritus University of Thrace, V. Sofias Street, 67100, Xanthi , GREECE,Moschou, Marianthi; Department of Production and Management Engineering, Democritus University of Thrace, V. Sofias Street, 67100, Xanthi , GREECE,Pantokratoras, Ioannis; Department of Production and Management Engineering, Democritus University of Thrace, V. Sofias Street, 67100, Xanthi , GREECE | 10 Principal Points in Cementing Geothermal Wells por Salim, Prisca; Texas A&M University at Qatar,Amani, Mahmood; Texas A&M University at Qatar |