Título: The methodology of generalized drying curves applied to paper drying
Aplicação da metodologia de curvas generalizadas à secagem de papel
Autores: Lima, Oswaldo Curty da Motta; UEM
Fecha: 2000-05-13
Publicador: Acta Scientiarum. Techonology
Fuente:
Tipo:

Tema: 3.06.00.00-6 Engenharia Química
secagem; secagem de papel; curvas de secagem generalizadas
3.06.00.00-6 Engenharia Química
Descripción: Este trabalho tem como objetivo estudar alguns aspectos relacionados à secagem de folhas de papel (celulose) sobre uma superfície aquecida e regime de convecção natural no interior de uma estufa. Foram analisadas três situações: - para a umidade inicial: amostras de 1 folha de papel, temperatura de secagem de 100ºC e umidade inicial de 130 a 180% (b.s.); - para a temperatura de secagem: amostras de 1 folha de papel, umidade inicial de 150% (b.s.) e temperatura de 50 a 110ºC;- para a espessura das amostras: temperatura de 100ºC; umidade inicial de 150% (b.s.) e amostras com de 1 a 5 folhas de papel. A influência destas variáveis no comportamento da secagem foi estudada a partir de uma proposta de curvas de secagem generalizadas, analisadas individualmente e para os três efeitos em conjunto, sendo proposto um modelo para ajustá-las
Aspects in the drying of paper (cellulose) sheets over a heated surface under natural convection condition inside an oven are provided. Three different operational situations are carried out: (1) for initial paper moisture contents: sheets of only one hand sheet of paper, drying temperature of 100ºC and initial moisture content from 130 to 180% (dry basis - d.b.); (2) for drying temperature: sheets of only one hand sheet of paper, initial moisture content of about 150% (d.b.) and drying temperature from 50 to 110ºC; (3) for sheet thickness: drying temperature of 100ºC, initial moisture content of about 150% (d.b.) and multi-layer sheets of one to five hand sheets of paper. The influence of these variables in drying curves behavior is studied through the theory of generalized drying curves, analyzed individually for each effect and for all together. Finally, the possibility of fitting them is discussed
Idioma: Portugués

Artículos similares:

Remoção da prata em efluentes radiográficos - DOI: 10.4025/actascitechnol.v29i1.83,Silver removal in radiographic wastewaters por Bortoletto, Edmilson Cesar; UEM,Igarashi-Mafra, Luciana; UEM,Sorbo, Amanda Cristina Alfredo Contrucci; UEM,Galliani, Naiara Aguiar; UEM,Barros, Maria Angélica Simões Dornellas de; UEM,Tavares, Celia Regina Granhen; Engenharia Química - UEM
Oxidação seletiva de benzeno a fenol utilizando catalisadores metaloporfirínicos - DOI: 10.4025/actascitechnol.v29i1.84,Selective oxidation of benzene to phenol with metaloporphyrins catalysts por Olsen, Mara Heloisa Neves; UEM,Andrade, Liliane Pires; UEM,Salomão, Gisele Cantalice; UFRJ,Fernandes, Christiane; UENF,Horn Júnior, Adolfo; UENF,Cardozo-Filho, Lúcio; UEM,Antunes, Octavio Augusto Ceva; UFRJ
Simulação e análise de um sistema industrial de colunas de destilação de etanol - DOI: 10.4025/actascitechnol.v29i1.81,Simulation and analysis of an industrial system of columns for ethanol distillation por Marquini, Maria Fatima; UEM,Mariani, Douglas Castilho; UEM,Meirelles, Antonio José de Almeida; UEM,Santos, Onélia Aparecida Andreo dos; UEM,Jorge, Luiz Mario de Matos; UEM
10